Mechanical properties of ultrafine-grained AX41 magnesium alloy at room and elevated temperatures

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216208%3A11320%2F18%3A10389527" target="_blank" >RIV/00216208:11320/18:10389527 - isvavai.cz</a>

Result on the web

<a href="https://doi.org/10.1016/j.msea.2017.10.076" target="_blank" >https://doi.org/10.1016/j.msea.2017.10.076</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.msea.2017.10.076" target="_blank" >10.1016/j.msea.2017.10.076</a>

Result language

angličtina

Original language name

Mechanical properties of ultrafine-grained AX41 magnesium alloy at room and elevated temperatures

Original language description

Mechanical properties of ultra-fine grained AX41 magnesium alloy were investigated at ambient and elevated temperatures. The study focuses on the effect of the grain size, dislocation density and crystallographic texture on the strength and formability. Commercial AX41 magnesium alloy was processed by hot extrusion followed by eight passes of equal-channel angular pressing at temperatures of 220 and 250 degrees C. Material was tested in tension in the direction parallel to the ECAP processing at temperatures up to 200 degrees C. In this temperature range, the ultra-fine grained structure is thermally stable. The strength of the material at room temperature is significantly affected by texture. In particular, basal texture component formed in ECAP samples is tilted by 40 degrees from the processing direction and therefore facilitates plastic deformation by basal slip. In contrast, the texture of extruded material is not suitable for basal slip deformed in the same direction. The effect of texture on strength can outweigh the effect of reduced grain size and increased dislocation density in ultrafine-grained AX41 alloy. At elevated temperatures, starting from 100 degrees C, the deformation behaviour is controlled simultaneously by dislocation slip and grain boundary sliding (GBS). Mechanical properties of the as-cast coarse grained material are virtually independent of the temperature. On the other hand, the reduced grain size of UFG material caused the progressive decrease of the proof stress and, simultaneously, considerably improves the ductility. The study systematically shows that the effect of microstructural features on mechanical properties of coarse grained and UFG AX41 alloy strongly depends on the dominant mechanism of plastic deformation.

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

10302 - Condensed matter physics (including formerly solid state physics, supercond.)

Project

Result was created during the realization of more than one project. More information in the Projects tab.

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2018

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Materials Science &amp; Engineering A: Structural Materials: Properties, Microstructure and Processing

ISSN

0921-5093

e-ISSN

—

Volume of the periodical

731

Issue of the periodical within the volume

1

Country of publishing house

CH - SWITZERLAND

Number of pages

8

Pages from-to

438-445

UT code for WoS article

000440881000047

EID of the result in the Scopus database

2-s2.0-85048937689