Mechanical fracture parameters of cement based mortars with wste glass powder
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F16%3APU121045" target="_blank" >RIV/00216305:26110/16:PU121045 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Mechanical fracture parameters of cement based mortars with wste glass powder
Original language description
Glass is an amorphous solid substance with pozzolanic properties that can be used as a partial substitute for ordinary Portland cement (PC) in cement based composites. In the research conducted for this paper, the PC was partially replaced by fine-ground waste laboratory borosilicate glass (in mixtures where 5, 10, 15 and 20 % by mass was substituted). Beam specimens with the dimensions 40 x 40 x 160 mm were prepared from each mixture. After demoulding, the specimens were kept under standard laboratory conditions. Basic tests were conducted at the age of 7, 28, 56, and 90 days: the compressive (fc) and flexural (ff) strengths were determined according to the ČSN EN 1015-11 standard. Specimens were also subjected to fracture testing at the age of 28 days. Three-point bending tests were conducted on beams with an initial central edge notch. Load vs. displacement diagrams were recorded and modulus of elasticity (E), fracture toughness (KIce) and fracture energy (GF*) were determined. Strength increased w
Czech name
—
Czech description
—
Classification
Type
O - Miscellaneous
CEP classification
JN - Civil engineering
OECD FORD branch
—
Result continuities
Project
<a href="/en/project/GA14-04522S" target="_blank" >GA14-04522S: Investigation of processes at the formation of solid structure in the silicon oxide-Portland cement system in a relation to the properties of binder</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů