Determination of Dehumidification Capacity of Water Wall with Controlled Water Temperature: Experimental Verification under Laboratory Conditions

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F21%3APU141243" target="_blank" >RIV/00216305:26110/21:PU141243 - isvavai.cz</a>

Result on the web

<a href="https://www.mdpi.com/2071-1050/13/10/5684" target="_blank" >https://www.mdpi.com/2071-1050/13/10/5684</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/su13105684" target="_blank" >10.3390/su13105684</a>

Result language

angličtina

Original language name

Determination of Dehumidification Capacity of Water Wall with Controlled Water Temperature: Experimental Verification under Laboratory Conditions

Original language description

Water elements with flowing water on the surface are common in buildings as a form of indoor decoration, and they are most often perceived as passive humidifiers. However, by controlling water temperature, they can be also used for air dehumidification. The dehumidification capacity of indoor water elements was investigated experimentally under laboratory conditions. For the experimental verification of dehumidification capacity, a water wall prototype with an effective area of falling water film of 1 m(2) and a measuring system were designed and developed. A total of 15 measurements were carried out with air temperatures ranging from 22.1 degrees C to 32.5 degrees C and relative humidity from 58.9% to 85.6%. The observed dehumidification capacity varied in the range of 21.99-315.36 g/h for the tested measurements. The results show that the condensation rate is a dynamic process, and the dehumidification capacity of a water wall strongly depends on indoor air parameters (air humidity and temperature). To determine the dehumidification capacity of a water wall for any boundary conditions, the equations were determined based on measured data, and two methods were used: the linear dependence between humidity ratio and condensation rate, and nonlinear surface fitting based on the dependence between the condensation rate, air temperature, and relative humidity.

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20101 - Civil engineering

Project

—

Continuities

O - Projekt operacniho programu

Publication year

2021

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Sustainability

ISSN

2071-1050

e-ISSN

—

Volume of the periodical

13

Issue of the periodical within the volume

10

Country of publishing house

CH - SWITZERLAND

Number of pages

17

Pages from-to

1-17

UT code for WoS article

000662558000001

EID of the result in the Scopus database

—