Measurement of deformation forces and stresses during the Taylor anvil test at the increases temperatures of the specimens

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F04%3APU43926" target="_blank" >RIV/00216305:26210/04:PU43926 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

čeština

Original language name

Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků

Original language description

This article deals with the experimental measurement of deformation forces and stresses during the Taylor anvil test performed with the specimens of 12 122.3 steel at the increased temperature of the specimens. By the help of the storage oscilloscope Tektronix the stress pulses were taken and consequently converted to the deformation - forming force. Further the surface temperature of the specimens was measured with the contact sensor, the impact temperature with the contactless temperature sensing heead called Thermalert Compact MID and the new constructional design of the carrier thermal block was practically verified. Our effort was to approach the TAT experiment to real forming conditions in the praxis. That is because the component material warmsup at the cold forming process in virtue of the translocation of the atoms inside of the metal.

Czech name

Zjišťování rázových sil a napětí u Taylorova kompresního testu za zvýšených teplot vzorků

Czech description

This article deals with the experimental measurement of deformation forces and stresses during the Taylor anvil test performed with the specimens of 12 122.3 steel at the increased temperature of the specimens. By the help of the storage oscilloscope Tektronix the stress pulses were taken and consequently converted to the deformation - forming force. Further the surface temperature of the specimens was measured with the contact sensor, the impact temperature with the contactless temperature sensing heead called Thermalert Compact MID and the new constructional design of the carrier thermal block was practically verified. Our effort was to approach the TAT experiment to real forming conditions in the praxis. That is because the component material warmsup at the cold forming process in virtue of the translocation of the atoms inside of the metal.

Type

D - Article in proceedings

CEP classification

JR - Other machinery industry

OECD FORD branch

—

Project

—

Continuities

Z - Vyzkumny zamer (s odkazem do CEZ)

Publication year

2004

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Article name in the collection

Experimentální analýza napětí 2004

ISBN

80-239-2964-X

ISSN

—

e-ISSN

—

Number of pages

4

Pages from-to

125-128

Publisher name

ŠKODA VÝZKUM s.r.o.

Place of publication

Plzeň

Event location

Kašperské Hory

Event date

Jun 1, 2004

Type of event by nationality

WRD - Celosvětová akce

UT code for WoS article

—