Material and technological investigation of machined surfaces of the OCHN3MFA steel

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F19%3APU132271" target="_blank" >RIV/00216305:26210/19:PU132271 - isvavai.cz</a>

Alternative codes found

RIV/60162694:G43__/19:00536638

Result on the web

<a href="http://www.elis.sk/download_file.php?product_id=6091&session_id=ggsdk762tf4vui28hj7f4d5id6" target="_blank" >http://www.elis.sk/download_file.php?product_id=6091&session_id=ggsdk762tf4vui28hj7f4d5id6</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4149/km_2019_1_131" target="_blank" >10.4149/km_2019_1_131</a>

Result language

angličtina

Original language name

Material and technological investigation of machined surfaces of the OCHN3MFA steel

Original language description

This paper deals with the effect of selected cutting parameter values in machining of OCHN3MFA steel on AFM and SEM microstructural analysis, cutting forces, nanohardness, 2D and 3D surface roughness, and material removal rate of surface layers after machining. OCHN3MFA steel was selected and used to perform experiments. Firstly, the selected steel was investigated before machining tests, due to the checking of the initial microstructure and chemical composition. The microstructure was performed on the Tescan Vega TS 5135 scanning electron microscope (SEM) with the X-ray microanalyzer Noran Six/300, and the Oxford Instruments MFP-3D Infinity atomic force microscope (AFM). Chemical composition was analyzed on Tasman Q4 surface analyzer. All machining tests of the used samples were performed under the selected cutting parameters in the SU 50A lathe machine tool with the CNMG 120408-M5 cementite carbide cutting insert clamped in the suitable DCLNR 2525M12-M cutting tool holder. During the machining process of testing samples, individual components of cutting forces were measured on a Kistler 9257B piezoelectric dynamometer with their subsequent evaluation using software Dynoware. Other experiments following the machining process were performed, evaluating the effect of selected cutting parameters on surface hardening. Surface hardening after machining of testing samples was subsequently measured on Hysitron TI950 Triboindenter with a Cube Corner measuring tip and evaluated by software Triboscan. 2D and 3D surface roughness and material removal rate (MRR) were finally performed on Talysurf CCI Lite and evaluated by software TalyMap Platinum.

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20501 - Materials engineering

Project

—

Continuities

S - Specificky vyzkum na vysokych skolach

Publication year

2019

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

KOVOVE MATERIALY-METALLIC MATERIALS

ISSN

0023-432X

e-ISSN

1338-4252

Volume of the periodical

57

Issue of the periodical within the volume

2

Country of publishing house

SK - SLOVAKIA

Number of pages

12

Pages from-to

131-142

UT code for WoS article

000461279600006

EID of the result in the Scopus database

2-s2.0-85064469721