Influence of different wire materials on the machining of Albromet W130 by WEDM

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F24%3APU152609" target="_blank" >RIV/00216305:26210/24:PU152609 - isvavai.cz</a>

Alternative codes found

RIV/61989100:27230/24:10256795

Result on the web

<a href="https://journals.sagepub.com/doi/abs/10.1177/09544054241289186" target="_blank" >https://journals.sagepub.com/doi/abs/10.1177/09544054241289186</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1177/09544054241289186" target="_blank" >10.1177/09544054241289186</a>

Result language

angličtina

Original language name

Influence of different wire materials on the machining of Albromet W130 by WEDM

Original language description

Wire Electrical Discharge Machining (WEDM) is an unconventional machining technology, widely spread in different sectors of many industries. The machining uses periodically repeating electrical impulses, which allows all materials with at least a minimum electrical conductivity to be machined. The machining tool is a thin wire that can be made of many different materials. Wire electrode material requirements vary from industry to industry. This study aimed to increase the efficiency of WEDM through an analysis of the influence of the type of wire material on the machining of Albromet W130 copper alloy. The analysis comprised a molybdenum, brass and a copper wire of a 0.25 mm diameter and a Box-Behnken design of experiment totalling 42 rounds. The design of experiment results analysis covered cutting speed, machined surfaces' topography and morphology, and the subsurface layer condition. Furthermore, an analysis of the wire electrodes used in the experiment was carried out. The highest cutting speed was achieved using a copper wire and the lowest R a values were achieved in samples machined with a molybdenum wire.

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20301 - Mechanical engineering

Project

<a href="/en/project/FW06010039" target="_blank" >FW06010039: Research into the substitutability of the AMPCOLOY 940 material with the new ALBROMET W130 material for mould inserts with a special texture produced by wire electrical discharge machining</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2024

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

ISSN

0954-4054

e-ISSN

2041-2975

Volume of the periodical

238

Issue of the periodical within the volume

14

Country of publishing house

GB - UNITED KINGDOM

Number of pages

14

Pages from-to

„“-„“

UT code for WoS article

001346287500001

EID of the result in the Scopus database

2-s2.0-85208198834