Pin-Hole Discharge Creation in Na2SO4 Water Solutions

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26310%2F13%3APU99332" target="_blank" >RIV/00216305:26310/13:PU99332 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
Pin-Hole Discharge Creation in Na2SO4 Water Solutions
Original language description
This work deals with the diaphragm discharge generated in water solutions containing Na2SO4 as a supporting electrolyte. The solution conductivity was varied in the range of 270-750 microS/cm. The batch plasma reactor with volume of 100 ml was divided into two electrode spaces by the Shapal-M ceramics dielectric barrier with a pin-hole (diameter of 0.6 mm). Three variable barrier thicknesses (0.3; 0.7 and 1.5 mm) and non-pulsed DC voltage up to 2 kV were used for the discharge creation. Each of the current-voltage characteristic can be divided into three parts: electrolysis, bubble formation and discharge operation. The experimental results showed that the discharge ignition moment in the pin-hole was significantly dependent on the dielectric diaphragmthickness. Breakdown voltage increases with the increase of the dielectric barrier thickness.
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
BL - Plasma physics and discharge through gases
OECD FORD branch
—

Project
<a href="/en/project/DF11P01OVV004" target="_blank" >DF11P01OVV004: Plasma chemical processes and technologies for conservation of archaeological metallic objects</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year
2013
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)