Machinability and properties of zirconia ceramics prepared by gelcasting method
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26620%2F19%3APU133770" target="_blank" >RIV/00216305:26620/19:PU133770 - isvavai.cz</a>
Alternative codes found
RIV/68081723:_____/20:00511710 RIV/00216305:26620/20:PU133770
Result on the web
<a href="https://www.tandfonline.com/doi/full/10.1080/17436753.2019.1675402" target="_blank" >https://www.tandfonline.com/doi/full/10.1080/17436753.2019.1675402</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1080/17436753.2019.1675402" target="_blank" >10.1080/17436753.2019.1675402</a>
Alternative languages
Result language
angličtina
Original language name
Machinability and properties of zirconia ceramics prepared by gelcasting method
Original language description
The machinability of newly developed zirconia ceramics for computer numerically controlled milling (CNC) was investigated. The zirconia blanks were prepared by the gelcasting method and tested in the green and two pre-sintered states. All blanks exhibited uniform sintering shrinkage in all directions. The blanks were investigated from the viewpoint of surface milling roughness, quality of milled edges and sharp tips, and machinability of thin structures. The best milling results were obtained for the blanks pre-sintered at 900?C/1?h. Mechanical properties of zirconia blanks, such as biaxial flexural strength, microhardness, indentation elastic modulus, and fracture toughness were determined in the green and pre-sintered states (900 and 1100?C/1?h) and the correlation with the milling results was discussed. The biaxial strength tests of sintered discs showed the advantage of optimised surface milling over conventional polishing.
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20504 - Ceramics
Result continuities
Project
Result was created during the realization of more than one project. More information in the Projects tab.
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2020
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Advances in Applied Ceramics
ISSN
1743-6753
e-ISSN
1743-6761
Volume of the periodical
119
Issue of the periodical within the volume
5-6
Country of publishing house
GB - UNITED KINGDOM
Number of pages
9
Pages from-to
252-260
UT code for WoS article
000490058500001
EID of the result in the Scopus database
2-s2.0-85074485278