Using of the electron microscope to evaluate the tool wear for a selected cutting insert

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F44555601%3A13420%2F18%3A43894114" target="_blank" >RIV/44555601:13420/18:43894114 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.21062/ujep/152.2018/a/1213-2489/MT/18/4/635" target="_blank" >http://dx.doi.org/10.21062/ujep/152.2018/a/1213-2489/MT/18/4/635</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.21062/ujep/152.2018/a/1213-2489/MT/18/4/635" target="_blank" >10.21062/ujep/152.2018/a/1213-2489/MT/18/4/635</a>

Result language
angličtina
Original language name
Using of the electron microscope to evaluate the tool wear for a selected cutting insert
Original language description
Using of cutting inserts is currently a normal part of the manufacturing process. The article deals with analysis of tool wear after machining at one selected cutting insert. Evaluation of this insert was made by electron microscopy. There was used SEM and EDS analysis. For this purpose was used scanning electron microscope Tescan Vega 3 and EDS analyzer Bruker 16 which is part of this microscope. These analysis can provide a good picture of the structure and construction of inserts, their composition and for situation on the insert after machining. This may assist in finding suitable cutting conditions. As experimental material the hardened steel class 16MnCr5 according to EN 10027-1 has been machining. SEM images of final tool wear of the cutting insert were recorded. The reason was to map the tool wear state after machining using electron microscopy to give a better view of the situation. These analyzes were performed in other experiments performed at the Faculty of Mechanical Engineering at Jan Evangelista Purkyne University in ústí nad Labem. (C) 2018. Published by Manufacturing Technology.
Czech name
—
Czech description
—

Type
J<sub>SC</sub> - Article in a specialist periodical, which is included in the SCOPUS database
CEP classification
—
OECD FORD branch
20301 - Mechanical engineering

Project
<a href="/en/project/ED4.1.00%2F11.0260" target="_blank" >ED4.1.00/11.0260: Education improvement & research expansion at FPTM</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Publication year
2018
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)