Experimental Verification of an Analytical Model for the Ringshaped Piezoelectric Transformer
Result description
Piezoelectric transformers prepared using bulk PZT ceramic rings poled homogeneously along thickness were studied experimentally on the commercially available rings (PZT type APC841, d = 20 mm, D = 50 mm and thickness 6 mm, aspect ratio d/D = 0.40) as well as analytically. Input and output parts were formed by the concentric ring electrodes. The fundamental and the first overtone were measured for the transformation ratio and efficiency. Ring transformer geometry shows the high transformation ratios (upto 108 under no-load condition for the first overtone) and efficiencies 91-99% for the properly designed electrode diameter. The optimum resistive load was relatively small within the range of 0.1 ? 5 k?. The optimum aspect ratio of electrode was foundas d1/D = 0.70. The fundamental resonance frequency was found insensitive to the electrode diameter contrary to the first overtone. Analytical calculations are also used for the comparison of the mechanically free and clamped transformer.
Keywords
The result's identifiers
Result code in IS VaVaI
Result on the web
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Experimental Verification of an Analytical Model for the Ringshaped Piezoelectric Transformer
Original language description
Piezoelectric transformers prepared using bulk PZT ceramic rings poled homogeneously along thickness were studied experimentally on the commercially available rings (PZT type APC841, d = 20 mm, D = 50 mm and thickness 6 mm, aspect ratio d/D = 0.40) as well as analytically. Input and output parts were formed by the concentric ring electrodes. The fundamental and the first overtone were measured for the transformation ratio and efficiency. Ring transformer geometry shows the high transformation ratios (upto 108 under no-load condition for the first overtone) and efficiencies 91-99% for the properly designed electrode diameter. The optimum resistive load was relatively small within the range of 0.1 ? 5 k?. The optimum aspect ratio of electrode was foundas d1/D = 0.70. The fundamental resonance frequency was found insensitive to the electrode diameter contrary to the first overtone. Analytical calculations are also used for the comparison of the mechanically free and clamped transformer.
Czech name
—
Czech description
—
Classification
Type
Jx - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
BM - Solid-state physics and magnetism
OECD FORD branch
—
Result continuities
Project
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2015
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Journal of Electrical and Electronics Engineering
ISSN
2067-2128
e-ISSN
—
Volume of the periodical
8
Issue of the periodical within the volume
2
Country of publishing house
RO - ROMANIA
Number of pages
6
Pages from-to
23-28
UT code for WoS article
—
EID of the result in the Scopus database
—
Result type
Jx - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP
BM - Solid-state physics and magnetism
Year of implementation
2015