Improving the Tribological and Mechanical Properties of an Aluminium Substrate by Deposition of TiCN Coatings
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F17%3A00004231" target="_blank" >RIV/46747885:24210/17:00004231 - isvavai.cz</a>
Alternative codes found
RIV/46747885:24620/17:00004231
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Improving the Tribological and Mechanical Properties of an Aluminium Substrate by Deposition of TiCN Coatings
Original language description
The article presents an investigation of the influence of coating deposition parameters, in particular a variation with 50% of both cathodic arc current and bias voltage, on the mechanical and tribological properties of TiCN coatings on an aluminium substrate deposited by the cathodic arc evaporation of metals at a constant gas flow ratio between C2H2 and N2 of 17.65 % / 82.35 %. The determined nanohardness values for the samples examined are in the range of 10 to 23 GPa. Surface morphology and chemical composition were estimated by a scanning electron microscope (SEM) and an energy dispersive spectrometer (EDS) of SEM. The tribological behaviour of the TiCN layers was examined using the "Ball-on-Disk" method (ASTM G99-95) and using a ball made of Ah03 as a counter-part and a load of 10N. The friction coefficient was measured in the range of 0.182 to 0.116.
Czech name
—
Czech description
—
Classification
Type
J<sub>SC</sub> - Article in a specialist periodical, which is included in the SCOPUS database
CEP classification
—
OECD FORD branch
20506 - Coating and films
Result continuities
Project
<a href="/en/project/LO1201" target="_blank" >LO1201: DEVELOPMENT OF THE INSTITUTE FOR NANOMATERIALS, ADVANCED TECHNOLOGIES AND INNOVATION</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2017
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Manufacturing Technology
ISSN
1213-2489
e-ISSN
—
Volume of the periodical
17
Issue of the periodical within the volume
5
Country of publishing house
CZ - CZECH REPUBLIC
Number of pages
7
Pages from-to
652-658
UT code for WoS article
—
EID of the result in the Scopus database
2-s2.0-85030538774