Comparison of modal characteristic of wrapped and winded composite tubes from carbon prepreg

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F17%3A00004379" target="_blank" >RIV/46747885:24210/17:00004379 - isvavai.cz</a>

Result on the web

<a href="http://dx.doi.org/10.21595/vp.2017.18545" target="_blank" >http://dx.doi.org/10.21595/vp.2017.18545</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21595/vp.2017.18545" target="_blank" >10.21595/vp.2017.18545</a>

Result language

angličtina

Original language name

Comparison of modal characteristic of wrapped and winded composite tubes from carbon prepreg

Original language description

Constructions based on long fiber composite frames gaining significant and irreplaceable position through almost all traffic sectors. The aim of this presented work is a study of composite rods made by two ways from pre impregnated fibres. In technical practice, one can find applications of so called "prepregs", especially for so-called wrapping, which is a gradual helical layering of wide tapes. This is a quite simply method with a good quality of final parts, but the using is limited only for straight shapes. Therefore, a method called winding, which is a simultaneous deposition of larger number of fiber filaments was used to handle the problem for curved shapes and fluently changed cross-sections. Even though this method could expand the using of presaturated fibres, in a real case compared with wrapped parts there is evident imperfect alignment and mutually storing of placed fibers. This could be mainly caused by a significant tortuosity and stickiness of the individual fiber strands. The objective the carried work was to experimentally compare the vibrational - modal behavior of two almost identical rods. One was winded and the second kind was wrapped with the same structure of layers, weight and curing parameters. The results of the two compared tubes, that should be theoretically identical, were significantly different. Another step was compilation of a numerical model and verify its suitability for parts created with the two mentioned production methods. The numerical model was in a good agreement with the empirical obtained from the experiment with wrapped parts. However, the using of this standard model also for winded tube is questionable, because of the significantly differences in founded natural frequencies.

Czech name

—

Czech description

—

Type

D - Article in proceedings

CEP classification

—

OECD FORD branch

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Project

—

Continuities

S - Specificky vyzkum na vysokych skolach

Publication year

2017

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Article name in the collection

Vibroengineering Procedia

ISBN

—

ISSN

2345-0533

e-ISSN

—

Number of pages

6

Pages from-to

91-96

Publisher name

JVE International

Place of publication

—

Event location

Liberec

Event date

Jan 1, 2017

Type of event by nationality

WRD - Celosvětová akce

UT code for WoS article

—