Experimental shrinkage study of ceramic DLP 3D printed parts after firing green bodies in a KILN
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F19%3A00006581" target="_blank" >RIV/46747885:24210/19:00006581 - isvavai.cz</a>
Result on the web
<a href="https://www.researchgate.net/publication/331569664_Experimental_shrinkage_study_of_ceramic_DLP_3D_printed_parts_after_firing_green_bodies_in_a_KILN" target="_blank" >https://www.researchgate.net/publication/331569664_Experimental_shrinkage_study_of_ceramic_DLP_3D_printed_parts_after_firing_green_bodies_in_a_KILN</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.17973/MMSJ.2019_03_2018113" target="_blank" >10.17973/MMSJ.2019_03_2018113</a>
Alternative languages
Result language
angličtina
Original language name
Experimental shrinkage study of ceramic DLP 3D printed parts after firing green bodies in a KILN
Original language description
The objective of this work was to investigate dimensional parameters of 3D printed parts from glass ceramic photopolymer before and after debinding and sintering in a kiln. During experiments, batches of green bodies were printed with different layer thickness and curing strategy. We used 3D printer with ultraviolet LED as a light power source. The peak of intensity of the UV LED was in the range from 385 to 405 nm. DLP projector from Texas Instruments was used for mask projection. After printing, each batch of green bodies was cleaned and post-cured in a UV chamber. Then their dimensions were measured, overgrowth of each sample was calculated. The next stage of the experiment was kiln firing according to special firing schedule. Dimensions of final parts were measured again, and their shrinkage was calculated. The experiment proved the high influence of printing parameters on the overgrowth of models and almost no influence on shrinkage of parts after firing.
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20301 - Mechanical engineering
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2019
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
MM Science Journal
ISSN
1803-1269
e-ISSN
—
Volume of the periodical
2019
Issue of the periodical within the volume
March
Country of publishing house
CZ - CZECH REPUBLIC
Number of pages
5
Pages from-to
2767-2771
UT code for WoS article
000532567500007
EID of the result in the Scopus database
2-s2.0-85065015973