Sorption properties of iron impregnated activated carbon prepared from acrylic fibrous wastes

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24410%2F16%3A00003845" target="_blank" >RIV/46747885:24410/16:00003845 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
Sorption properties of iron impregnated activated carbon prepared from acrylic fibrous wastes
Original language description
In this work, waste acrylic fiber web was impregnated with iron chloride solution and another web without salt impregnation was carbonized by heating under a layer of charcoal through physical activation in a high temperature furnace to produce activated carbon and iron impregnated activated carbon (FeAC). After stabilization at heating rate 50°C.hr-1 the carbonization process was performed at the heating rate of 300°C.hr-1. Both the webs were heated to 1200°C with no holding time for getting a higher surface area and porosity. Both the samples were characterized by using BET surface area, SEM, EDX and TGA for determining the surface area, microscopic structure and content of different elements. Iron impregnated activated carbon (FeAC) was later used as adsorbent for the removal of methylene blue from an aqueous solution. The dye removal percentage and adsorption capacity was checked at different experimental parameters like different dye concentrations, adsorbent dosage, stirring speed and different pH.
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JJ - Other materials
OECD FORD branch
—

Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)