Optimisation of high speed milling of hardened tool steel

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F03%3A00000029" target="_blank" >RIV/49777513:23210/03:00000029 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Optimisation of high speed milling of hardened tool steel

Original language description

This paper presents an experimental investigation of high speed milling (HSM) of hardened tool steel. The experiments were performed with hardened ČSN 19552, equivalent to DIN 1.2343 tool steel (~ 58 HRC) using indexable insert toroidal cutter employingcoated carbide tool. The effect of different process parameters on the tool performance and cutting forces induced was investigated. The cutting parameters involved were; cutting speeds in the range of 100 to 400 m/min, feed variation from 0,03 to 0,15 mm/tooth, axial depth of cut from 0,2 to 1 mm, and radial depth of cut of 2 and 4 mm. Tool life was ended when flank wear reached 0,3 mm or gross chipping occurred. The optimum cutting conditions have been specified based on the modes of tool failure, tool life and cutting forces induced.

Czech name

—

Czech description

—

Type

D - Article in proceedings

CEP classification

JR - Other machinery industry

OECD FORD branch

—

Project

—

Continuities

Z - Vyzkumny zamer (s odkazem do CEZ)

Publication year

2003

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Article name in the collection

ICPM 2003

ISBN

80-01-02795-3

ISSN

—

e-ISSN

—

Number of pages

7

Pages from-to

137-143

Publisher name

České vysoké učení technické

Place of publication

Praha

Event location

Praha

Event date

Sep 3, 2003

Type of event by nationality

WRD - Celosvětová akce

UT code for WoS article

—