Fatigue and mechanical properties of thin wall semi-products produced by incremental forming processes

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F10%3A00504815" target="_blank" >RIV/49777513:23210/10:00504815 - isvavai.cz</a>
Alternative codes found
RIV/25797000:_____/10:#0000237
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
Fatigue and mechanical properties of thin wall semi-products produced by incremental forming processes
Original language description
The flow forming process is one of the very progressive and flexible forming technologies. This technology is used to achieve the desired final shapes by making incremental deformations. The initial semi product is reduced to the required dimensions by the combined application of rollers and a mandrel. Stepped semi products for hollow shafts were produced by using this flexible technology. The research first assessed the influence of process parameters on the mechanical properties of the product. Mechanical properties were determined on mini tensile test specimens. Light microscopy was used to analyse the microstructure and the depth of penetration of the deformation into the wall of the semi product and the surface quality of the carbonized layer after the final thermo-chemical treatment of the product. The technological process was optimized on the basis of test results and its parameters were established. As the aim of this research was to achieve the best combination of technologic
Czech name
—
Czech description
—

Project
Result was created during the realization of more than one project. More information in the Projects tab.
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year
2010
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)