Innovative Concepts for Hot Stamping Process
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F12%3A43917443" target="_blank" >RIV/49777513:23210/12:43917443 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Innovative Concepts for Hot Stamping Process
Original language description
Hot stamping is typically used for manufacturing car body parts. Thanks to hot deformation and rapid cooling, shaped parts with martensite microstructure and high yield and ultimate strengths are obtained. This paper provides an introduction to a new hotstamping process used together with the Q-P process for processing of high strength low alloy steels. By this procedure and by controlling the microstructure development, high strength exceeding 2000 MPa and elongation over 10% can be achieved. A steelcontaining 0.43% C, 0.59 - 1.17. % manganese and 2 - 2.6 % silicon was used for this experiment. FEM analysis was carried out to find hot stamping parameters for selected chemical compositions and sheet thicknesses. The results formed a basis of experimental work. The work consisted in material-technological modeling using a thermomechanical simulator. The primary goal of the experiment was to test the combination of hot stamping and Q-P processes for chosen UHS steels. The experiment pr
Czech name
—
Czech description
—
Classification
Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JG - Metallurgy, metal materials
OECD FORD branch
—
Result continuities
Project
<a href="/en/project/GPP107%2F12%2FP960" target="_blank" >GPP107/12/P960: Influence of a structure modification on mechanical properties of AHS steel</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2012
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Scientific reports : journal of the University of Applied Sciences Mittweida
ISSN
1437-7624
e-ISSN
—
Volume of the periodical
2012
Issue of the periodical within the volume
4
Country of publishing house
DE - GERMANY
Number of pages
4
Pages from-to
42-45
UT code for WoS article
—
EID of the result in the Scopus database
—