Insights for the Selection of the Machining Parameters in the Turning of Difficult-To-Cut

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F15%3A43925959" target="_blank" >RIV/49777513:23210/15:43925959 - isvavai.cz</a>

Alternative codes found

RIV/49777513:23640/15:43925959

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Insights for the Selection of the Machining Parameters in the Turning of Difficult-To-Cut

Original language description

Usually, the coatings used in industrial applications require post-processing to reach their final shape. However, some of these coatings are difficult-to-cut, mainly because of their high hardness. The present study provides a revision of some experimental investigations on the turning of WC-Co, Stellite, and Fe-based and NiAl alloys. The materials are used for both coatings and sintered workpieces providing insights for conducting turning tests. For the success of the turning process, the selection ofthe machining parameters is a critical issue. Based on the reviewed investigations, the surface roughness is clearly influenced by the feed rate, expecting higher values than the ones predicted by the theoretical equations. Besides, the increase of boththe cutting speed and feed rate leads to a high tool wear. Likewise, the increase of the feed rate leads to higher machining forces. In general, the influence of the cutting speed and depth of cut is less evident. Regarding the machining

Czech name

—

Czech description

—

Type

J_x - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)

CEP classification

JR - Other machinery industry

OECD FORD branch

—

Project

<a href="/en/project/ED2.1.00%2F03.0093" target="_blank" >ED2.1.00/03.0093: Regional Technological Institute - RTI</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2015

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Volume of the periodical

15

Issue of the periodical within the volume

3

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

9

Pages from-to

295-303

UT code for WoS article

—

EID of the result in the Scopus database

—