Inter-laboratory comparison of formaldehyde emission from particleboard using ASTM D 6007-02 method

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F12%3A54632" target="_blank" >RIV/60460709:41320/12:54632 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
Inter-laboratory comparison of formaldehyde emission from particleboard using ASTM D 6007-02 method
Original language description
An inter-laboratory comparison of formaldehyde emission (FE) from laminated (PL) and uncoated (P2) particleboard (PB) with 16 mm thick-E1, used for non-structural and interior applications such as furniture materials and supplied from a commercial plantin the Czech Republic, was performed in two laboratories using the American small test chamber (ASTM D 6007-02). The results showed highly significant differences between the laboratories for PL (P<0.001), and not significant for P2 (P=0.33), and the differences between samples were significant for P2 and PL (P<0.05). The FE values ranged between 0.056 and 0.090 and from 0.088 to 0.099 ppm for PL and from 0.129 to 0.223 and from 0.175 to 0.182 ppm for P2 as measured in laboratories 1 and 2, respectively. There was a good correlation (R 2=0.84) between the formaldehyde values measured for both types of particleboards in the two laboratories. Most of the formaldehyde values were in agreement with the requirements of the California Air Res
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JJ - Other materials
OECD FORD branch
—

Publication year
2012
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)