Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F14%3A63140" target="_blank" >RIV/60460709:41320/14:63140 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood

Original language description

This paper deals with splinter size analysis of beech wood, considering the angular tool of the cutter and also the physical and mechanical wood properties substantially influencing wood processing technology. Particle size analysis was conducted by sieving the samples using a set of laboratory sieves, with subsequent determination of the individual fraction shares. The results have been compared with respect to the possibility of wood waste separation and filtration, and its subsequent utilization, above all, in the production of agglomerated materials and production of wood briquettes and pellets. The most frequently occurring fractions in native beech samples range between 5 and 8 mm and between 2 and 5 mm, while powder fractions below 125 ?m were found in less than 1% of investigated samples. The most frequently occurring fractions in thermally modified beech wood ranged from 0.5 to 1 mm, and the share of powder wood particles below 125 ?m was less than 4%.

Czech name

—

Czech description

—

Type

J_x - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)

CEP classification

JP - Industrial processes and processing

OECD FORD branch

—

Project

—

Continuities

S - Specificky vyzkum na vysokych skolach

Publication year

2014

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

BioResources

ISSN

1930-2126

e-ISSN

—

Volume of the periodical

9

Issue of the periodical within the volume

1

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

15

Pages from-to

1346-1360

UT code for WoS article

000331996500106

EID of the result in the Scopus database

—