3D-moldability of veneers plasticized with water and ammonia

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F15%3A65397" target="_blank" >RIV/60460709:41320/15:65397 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.15376/biores.10.1.866-876" target="_blank" >http://dx.doi.org/10.15376/biores.10.1.866-876</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.10.1.866-876" target="_blank" >10.15376/biores.10.1.866-876</a>

Result language
angličtina
Original language name
3D-moldability of veneers plasticized with water and ammonia
Original language description
The 3D-moldability of veneers, as opposed to the moldability of plastic or other materials, is limited because of the characteristics of wood. Veneers can be modified by physical, chemical, or mechanical treatment. We chose water and ammonia-water solutions. After treatment for an established time, the moldability of veneers was examined. The level of concave deflection of a test piece of punch-molded veneer was assessed. Three sets of test pieces were tested by dipping in cold water (20 °C), hot water(95 °C), or a 25% solution of ammonia, for different durations of time. The results showed that the 3D-moldability of veneers increased by 66 to 119% after plasticization by a 25% solution of ammonia, unlike the unmodified veneers with a moisture contentof 7.65%. The increase in moldability was significantly higher in comparison to the veneers modified by dipping in cold water (20 °C) and hot water (95 °C). Futhermore, the relationship between the moisture content of the veneers after t
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JI - Composite materials
OECD FORD branch
—

Publication year
2015
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)