Influence of densification on bending strength of laminated beech wood

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F15%3A66342" target="_blank" >RIV/60460709:41320/15:66342 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.15376/biores.10.1.1506-1518" target="_blank" >http://dx.doi.org/10.15376/biores.10.1.1506-1518</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.10.1.1506-1518" target="_blank" >10.15376/biores.10.1.1506-1518</a>

Result language
angličtina
Original language name
Influence of densification on bending strength of laminated beech wood
Original language description
This paper reports the influence of densification and cyclic loading on the bending strength of laminated beech (Fagus sylvatica L.). There are many studies dealing with the bending strength of solid or laminated wood; however, densification is much lessexplored with respect to its use in the production of laminated wood. Laminated beech wood was loaded by three different numbers of cycles (1000, 2000, and 3000 cycles). Bending strength values of the cyclically loaded laminated wood were compared withthat of cyclically non-loaded laminated wood. The laminated wood was formed by a combination of densified and non-densified veneers, as well as polyvinyl cholride (PVC) fabric. The results show that the laminated wood consisting of densified and non-densified veneers, eventually with PVC film included, reached the higher values of bending strength in comparison with the traditional composition consisting of non-densified veneers. Densification had a strong impact on the bending strength,
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JI - Composite materials
OECD FORD branch
—

Publication year
2015
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)