Efficiency of sanding belts for Beech and Oak sanding

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F16%3A72087" target="_blank" >RIV/60460709:41320/16:72087 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.15376/biores.11.2.5242-5254" target="_blank" >http://dx.doi.org/10.15376/biores.11.2.5242-5254</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.11.2.5242-5254" target="_blank" >10.15376/biores.11.2.5242-5254</a>

Result language
angličtina
Original language name
Efficiency of sanding belts for Beech and Oak sanding
Original language description
The effects of wear on the performance of sanding belts were determined for European beech (Fagus sylvatica L.) and English oak (Quercus robur). These measurements are presented as a function of the defined sanding time of 480 min on a manual sanding belt machine. Sanding belt pressure on the piece surface (6600, 10400, 14700, and 18600 Pa), sanding direction (cutting speed vector with reference to wood fibers equal to 0, 60 and 90 degrees), wood hydrothermal treatment, and sanding belts from various manufacturers were the variables. The sanding belt wear was monitored by means of specific wood removal rate (g/cm2.min) in 20-min intervals by the means of reference samples with size of 50 x 50 x 50 mm, which were sanded for 1 min. The resulting curves for the sanding belts, as well as the statistical models of the wood removal rate, decreased as a function of the sanding time, described by the function y = a + b.e-ct. This work also describes the impact of wood species, optimum pressure, and grinding
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JJ - Other materials
OECD FORD branch
—

Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)