Cutting power during cross-cutting of selected wood species with a circular saw

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F16%3A72281" target="_blank" >RIV/60460709:41320/16:72281 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.15376/biores.11.4.10528-10539" target="_blank" >http://dx.doi.org/10.15376/biores.11.4.10528-10539</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.11.4.10528-10539" target="_blank" >10.15376/biores.11.4.10528-10539</a>

Result language
angličtina
Original language name
Cutting power during cross-cutting of selected wood species with a circular saw
Original language description
This study assessed the effect of selected factors, such as the feed force, wood species (beech (Fagus sylvatica L.), English oak (Quercus robur L.), and spruce (Picea abies L.)), and the number of saw blade teeth on cutting power in the cross-cutting of lumber. The cutting was done using a circular saw with a rotating motion of the saw blade at a constant cutting speed (vc) of 62 m.s-1. The tangentially bucked lumber had a relative humidity (wr) of 12% +- 1% and a thickness (e) of 50 mm. For the experiment, four circular saw blades with SK plates, a uniform diameter, and identical angular geometry were used. The saw blades had a different number of teeth, and one saw blade had 24 teeth and a chip limiter. The aim of this study was to expand the knowledge about the resulting cutting performance with different combinations of technological process parameters.
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JJ - Other materials
OECD FORD branch
—

Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)