The Effect of Selected Technical, Technological, and Material Factors on the Size of Juvenile Poplar Wood Chips Generated during Face Milling

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F17%3A75856" target="_blank" >RIV/60460709:41320/17:75856 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

The Effect of Selected Technical, Technological, and Material Factors on the Size of Juvenile Poplar Wood Chips Generated during Face Milling

Original language description

The effects of technical, technological, and material factors affecting the size of juvenile poplar wood chips were evaluated. Each analysis was performed on two species of poplar, namely natural poplar Populus tremula L. and plantation poplar clones Populus euramericana Serotina, and on juvenile and mature wood within each poplar species. A cutter with angular geometry was selected for the face milling: beta = 55 degrees (angle of cutting wedge), gamma = 15 degrees (rake angle). The cutting conditions were a feed rate of v(f) = 2,5 and 15 m.min(-1), cutting speed of v(c) = 30 m.s(-1), 45 m.s(-1), and 60 m.s(-1), and the depth of cut a(p) = 1 mm. An image analysis of the size of the largest and smallest fraction was performed. Most of the chips generated during the face milling of poplar wood were classified as flat grain wood. A small percentage of the generated chips could be included in the group of rod-shaped fibrous bulk particles with a considerable extension in one direction (smaller fractions

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20502 - Paper and wood

Project

—

Continuities

S - Specificky vyzkum na vysokych skolach

Publication year

2017

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

BioResources

ISSN

1930-2126

e-ISSN

—

Volume of the periodical

12

Issue of the periodical within the volume

3

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

16

Pages from-to

4881-4896

UT code for WoS article

000408497700024

EID of the result in the Scopus database

2-s2.0-85026789721