The Effect of Thermal Modification of Oak Wood on Waviness Values in the Planar Milling Process, Monitored with a Contact Method

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F18%3A77901" target="_blank" >RIV/60460709:41320/18:77901 - isvavai.cz</a>

Result on the web

<a href="http://dx.doi.org/10.15376/biores.13.1.1591-1604" target="_blank" >http://dx.doi.org/10.15376/biores.13.1.1591-1604</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.15376/biores.13.1.1591-1604" target="_blank" >10.15376/biores.13.1.1591-1604</a>

Result language

angličtina

Original language name

The Effect of Thermal Modification of Oak Wood on Waviness Values in the Planar Milling Process, Monitored with a Contact Method

Original language description

This article focuses on the evaluation of the process of planar milling of natural and thermally modified oak wood. The standard Thermowood process was used for the thermal modification. The quality of the machined surface was evaluated after planar milling. Various machining process parameters were set for individual samples. The effects of individual technical and technological factors on the quality of the newly created surface were subsequently evaluated. The mean arithmetic deviation of the waviness profile (W-a) was chosen as the evaluation parameter for milling. The effects of the following factors were monitored: cutting speed, feed rate, rake angle, and their mutual combinations. Natural and thermally modified oak wood were milled and subsequently evaluated. The quality of the machined surface was determined using a contact measuring device. Reducing the cutting speed increased the waviness, and decreasing the feed rate decreased the waviness. However, the cutting speed was not a statistical

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20502 - Paper and wood

Project

—

Continuities

S - Specificky vyzkum na vysokych skolach

Publication year

2018

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

BioResources

ISSN

1930-2126

e-ISSN

—

Volume of the periodical

13

Issue of the periodical within the volume

1

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

14

Pages from-to

1591-1604

UT code for WoS article

000427790000115

EID of the result in the Scopus database

2-s2.0-85041316064