Mechanical properties of Co-Cr-Mo alloy in dependence in the composition and production

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F16%3A43902520" target="_blank" >RIV/60461373:22310/16:43902520 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Mechanical properties of Co-Cr-Mo alloy in dependence in the composition and production

Original language description

The aim of this work was studying the effect of the composition and production on mechanical and tribological properties of cobalt alloys. Co-Cr-Mo alloy began to be used for manufacturing dental implants, but nowadays they are successfully used for the production of orthopaedic implants thanks to better wear resistance than is offered by titanium implants. However, there is still ongoing effort to even more improve the wear resistance and other properties of cobalt based alloy. The aim of this research was to find a suitable combination between composition and production, which would increase the wear resistance, keeping the other mechanical properties at least at the same level. Standard Co-Cr-Mo alloy and also Co-Cr-Mo alloy with various alloying elements, specifically Nb, Ti in an amount 5 wt%, were prepared by casting and also mechanical alloying followed by compacting method "Spark Plasma Sintering". The influence of production route as well as influence of alloying elements on the microstructure, mechanical and tribological properties were observed. Based on the obtained results, the Co-Cr-Mo-Ti alloy production by casting seems to be most suitable, because the addition of titanium has greatly improved the wear resistance. However, it is necessary to perform many other tests, especially tests of corrosion resistance and biocompatibility.

Czech name

—

Czech description

—

Type

J_x - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)

CEP classification

JG - Metallurgy, metal materials

OECD FORD branch

—

Project

<a href="/en/project/GBP108%2F12%2FG043" target="_blank" >GBP108/12/G043: Interface controlled properties of micro/nanocrystalline materials for advanced structural applications, biodegradable implants and hydrogen storage</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2016

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Volume of the periodical

16

Issue of the periodical within the volume

6

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

5

Pages from-to

1336-1340

UT code for WoS article

—

EID of the result in the Scopus database

2-s2.0-85007481163