The optimization of sintering conditions for the preparation of Ti-Al-Si alloys

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F17%3A43915357" target="_blank" >RIV/60461373:22310/17:43915357 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

The optimization of sintering conditions for the preparation of Ti-Al-Si alloys

Original language description

This work deals with optimization of Spark Plasma Sintering conditions for the preparation of Ti-Al-Si alloys. Ti-Al-Si alloys are appropriate material for high-temperature applications, especially for aerospace and automotive industry. They are characterized by low density, good mechanical properties and resistance against oxidation. Ti-Al-Si alloys were prepared by powder metallurgy using reactive sintering, followed by milling and Spark Plasma Sintering. Preparation of intermetallic compounds is complicated due to high melting points of intermediate phases, the exothermic reaction during their formation and high reactivity of the melt with melting crucible. TiAl10Si20 alloy was prepared by Spark Plasma Sintering under a pressure of 48 MPa and by High Pressure Spark Plasma Sintering under pressure of 6 GPa. The temperature was chosen between 1100 °C and 1204 °C. The porosity of TiAl10Si20 alloy decreases with pressure and with the high pressure also increases the hardness by 200 HV 5. Abrasive wear resistance of TiAl10Si20 alloy is very good

Czech name

—

Czech description

—

Type

J_SC - Article in a specialist periodical, which is included in the SCOPUS database

CEP classification

—

OECD FORD branch

20501 - Materials engineering

Project

<a href="/en/project/GBP108%2F12%2FG043" target="_blank" >GBP108/12/G043: Interface controlled properties of micro/nanocrystalline materials for advanced structural applications, biodegradable implants and hydrogen storage</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2017

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Volume of the periodical

17

Issue of the periodical within the volume

4

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

6

Pages from-to

483-488

UT code for WoS article

—

EID of the result in the Scopus database

2-s2.0-85029553385