Deposition of Fe2O3:Sn semiconducting thin films by reactive pulsed r-HiPIMS + ECWR co-sputtering from Fe and Sn targets

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F24%3A43928812" target="_blank" >RIV/60461373:22310/24:43928812 - isvavai.cz</a>

Result on the web

<a href="https://www.sciencedirect.com/science/article/pii/S101060302400220X?via%3Dihub" target="_blank" >https://www.sciencedirect.com/science/article/pii/S101060302400220X?via%3Dihub</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.jphotochem.2024.115676" target="_blank" >10.1016/j.jphotochem.2024.115676</a>

Result language

angličtina

Original language name

Deposition of Fe2O3:Sn semiconducting thin films by reactive pulsed r-HiPIMS + ECWR co-sputtering from Fe and Sn targets

Original language description

Semiconducting Fe2O3 thin films were deposited on SnO2:F (FTO) and Pt substrates by reactive high-power impulse magnetron sputtering combined with electron cyclotron wave resonance plasma (HiPIMS + ECWR). Fe2O3 films were fabricated either by sputtering from a single Fe target or by co-sputtering from an additional Sn target. Plasma parameters during co-sputtering were measured by an RF probe system enabling the comparison between HiPIMS + ECWR and only HiPIMS conditions used for the film deposition. As deposited Fe2O3 films were post-annealed in air at 450 °C and 650 °C, respectively. It was shown that as deposited Fe2O3 films were amorphous but became crystalline after post-annealing at 450 °C. Further increase of annealing temperature to 650 °C did not improve significantly the crystalline structure of the Fe2O3 film. All post-annealed Fe2O3 films exhibited photocurrents in the anodic region; generally, hematite films annealed at 650 °C exhibited higher photocurrents than those annealed at 450 °C. Films doped by Sn co-sputtering had higher photocurrents than films only doped by Sn diffusion during post-annealing from the FTO substrate. Hematite films on Pt substrate doped by Sn co-sputtering and post-annealed at 650 °C exhibited the highest photocurrents. It was verified by XPS analysis with ion sputtering depth profiling that Pt atoms also diffuse from the Pt substrate into the Fe2O3 film during the post-annealing at 650 °C and can, similar to Sn in the case of an FTO substrate, act as a dopant.

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

10405 - Electrochemistry (dry cells, batteries, fuel cells, corrosion metals, electrolysis)

Project

<a href="/en/project/GA23-05266S" target="_blank" >GA23-05266S: Study of key factors influencing the efficiency of photoelectrochemical cells using sunlight for synthesis reactions and water purification</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2024

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY

ISSN

1010-6030

e-ISSN

1873-2666

Volume of the periodical

454

Issue of the periodical within the volume

115676

Country of publishing house

CH - SWITZERLAND

Number of pages

11

Pages from-to

"nestránkované"

UT code for WoS article

001238910700001

EID of the result in the Scopus database

2-s2.0-85192161039