Evaluation of High-Viscosity Residual Fractions by Hot Filtration
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22320%2F23%3A43928608" target="_blank" >RIV/60461373:22320/23:43928608 - isvavai.cz</a>
Result on the web
<a href="https://pubs.acs.org/doi/10.1021/acs.energyfuels.3c01838" target="_blank" >https://pubs.acs.org/doi/10.1021/acs.energyfuels.3c01838</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1021/acs.energyfuels.3c01838" target="_blank" >10.1021/acs.energyfuels.3c01838</a>
Alternative languages
Result language
angličtina
Original language name
Evaluation of High-Viscosity Residual Fractions by Hot Filtration
Original language description
The high-viscosity residual fractions obtained during the secondary processing of crude oil are widely used as components in the production of marine fuels. Because of the high viscosity of these residual fractions, they cannot be used as marine fuel in accordance with the ISO 8217 standard (which monitors the quality parameters of residual marine fuels) without being mixed with a suitable low-viscosity cutter stock. Hot filtration, in accordance with the standardized procedures ISO 10307-1 and ISO 10307-2, is used to monitor the stability of the final marine fuels. However, this procedure cannot be applied to pure residual fractions because of their viscosity. We propose a procedure that does allow the application of hot filtration to determine the stability (in accordance with ISO 10307-1 and -2) of high-viscosity residual fractions. The proposed procedure involves mixing the residual fractions with a mixture of methyl esters in a suitable ratio. In this case, a 30% by weight addition of methyl esters to the tested high-viscosity residual fractions was determined to be the most suitable. The SV coefficient was employed to determine the optimal amount of the mixture of methyl ester (ČSN EN 14214) diluting component used to evaluate the high-viscosity residual fractions. The resulting values of TS (total sediment) and TSA (total sediment accelerated) parameters showed a high correlation, mainly for the most monitored parameter TSA, with dynamic viscosity at a temperature of 150 °C (R2TSA = 0.914) and C/H ratio (R2TSA = 0.929). Dependence of DV 150 and C/H ratio on asphaltene content representing n-heptane soluble material in residual fractions, as well as precursors of residual fraction instability, was also monitored. Determining the stability of pure residual fractions helps prevent possible technological problems arising during the storage and transport of either pure residual fractions or prepared marine fuels. © 2023 American Chemical Society.
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20402 - Chemical process engineering
Result continuities
Project
—
Continuities
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Others
Publication year
2023
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
ENERGY & FUELS
ISSN
0887-0624
e-ISSN
1520-5029
Volume of the periodical
37
Issue of the periodical within the volume
18
Country of publishing house
US - UNITED STATES
Number of pages
11
Pages from-to
13686-13697
UT code for WoS article
001061220000001
EID of the result in the Scopus database
2-s2.0-85171526110