Applied forces in the handling unit fixation mechanism
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F22%3A10244507" target="_blank" >RIV/61989100:27230/22:10244507 - isvavai.cz</a>
Alternative codes found
RIV/61989100:27240/22:10244507
Result on the web
<a href="https://hrcak.srce.hr/272614" target="_blank" >https://hrcak.srce.hr/272614</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.17559/TV-20200319070344" target="_blank" >10.17559/TV-20200319070344</a>
Alternative languages
Result language
angličtina
Original language name
Applied forces in the handling unit fixation mechanism
Original language description
The paper presents a construction design of a testing device, which was built for the purpose of checking the functional properties of the movement fixation mechanism of handling units, which is used for locking pallets with cars in place in some parking houses, developed by the enterprise KOMA Industry s.r.o. The testing device uses two positioning tables, whose moving parts are attached perpendicular to each other in the frame of the testing device. A pallet lock is attached to the sliding part of the vertical positioning table, which consists of three basic parts: body, pulley holder and compression coil spring. A plate is attached to the sliding part of the horizontal positioning device which is adapted to receive the stop of the fixation mechanism. Chapter 2.1. of this paper presents values of the measured vertical forces acting on the force transducer, which were generated by the reshaped coil spring with a wire of circular cross-section during the rolling of the pallet lock roller over the sloped surface of the stop. Section 2.2. presents an experimental procedure and the results of the measured vertical forces exerted by a reshaped coil spring with a wire of circular cross-section on the force sensor during the insertion of the pulley roller into the gap between the two end faces of the stop assembly. The experimental procedure and the results of the measured vertical forces exerted by the reshaped coil spring with a wire of circular cross-section on the force sensor during sliding of the lock pulley roller out of the gap in the stop are given in section 2.3. The conducted experimental measurements of the functional properties of the fixation lock of the pallet and the acquired values of acting vertical forces will serve to optimize the attaching of pallet fixation locks to the steel girders of the structure of the cell rack parking space of the automatic parking house, over which the chain conveyer transports pallets with vehicles into specified parking positions.
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20301 - Mechanical engineering
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2022
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Tehnički vjesnik – Technical Gazette
ISSN
1330-3651
e-ISSN
1848-6339
Volume of the periodical
29
Issue of the periodical within the volume
2
Country of publishing house
HR - CROATIA
Number of pages
8
Pages from-to
620-627
UT code for WoS article
000760151800011
EID of the result in the Scopus database
2-s2.0-85125056218