Surface roughness after machining and influence of feed rate on process

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27350%2F14%3A86091033" target="_blank" >RIV/61989100:27350/14:86091033 - isvavai.cz</a>
Alternative codes found
RIV/61989100:27360/14:86091033 RIV/61989100:27230/14:86091033 RIV/61989100:27740/14:86091033
Result on the web
<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.581.341" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/KEM.581.341</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.581.341" target="_blank" >10.4028/www.scientific.net/KEM.581.341</a>

Result language
angličtina
Original language name
Surface roughness after machining and influence of feed rate on process
Original language description
The aim of the work is to find out influence of feed rate on the quality for the machined surface, especially for surface roughness. The experiment was carried out by a cutting tool HURCO VMXt30 with respect to the following cutting parameters: cutting speed 250; 350; 450; 550 and 850 m.min-1, feed 0.1; 0.5 and 1.0 mm/tooth. For testing was used two most common materials in the steel grade 1.1191 (12 050) and 1.2343 (19 552), and we chose two ordinary parameters of surface roughness; Ra-the arithmeticalmean roughness deviation and Rz-the largest inequalities height profile in the transverse direction and the longitudinal direction of machining. The structural equations will be the result which can describe the character depending on the cut surface parameters. Machining was without cooling so by dry machining
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JQ - Machinery and tools
OECD FORD branch
—

Publication year
2014
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)