Evaluation of mechanical propertiesof the drawn wire using the design of experiments.
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F16%3A86098443" target="_blank" >RIV/61989100:27360/16:86098443 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Evaluation of mechanical propertiesof the drawn wire using the design of experiments.
Original language description
This paper deals with using the design of experiments (DOE) during the evaluation of mechanical properties of the wire for steel ropes. It was provided with a full factorial experiment with three factors at two levels. The factors are as follows: one-pass strain, the approaching angle and the method of the removing of the scales from the surface of hot rolled wire. The experimental material was a drawn wire with a 5.5 mm diameter of C78DP steel. The wire was drawn from the diameter of 5.5 mm to 2.5 mm using a straight-through single-block KOCH KGT 25 - E wire drawing machine. The total reduction was 79.3 %. The drawing dies of tungsten carbide had approach angles of 8o and 12o. Two uniform pass schedules were used with a different single-pass reduction. Two methods of descaling (mechanical and chemical) were used. Following each pass, an approx. 50 m sample was removed from the wire stock for subsequent testing. The following tests were carried out after each pass: tension test, torsion test to fracture and the reverse bend test to fracture. DOE was evaluated using both graphical and analytical methods. The significant factors and their interactions were determined and response surfaces were calculated.
Czech name
—
Czech description
—
Classification
Type
D - Article in proceedings
CEP classification
JS - Reliability and quality management, industrial testing
OECD FORD branch
—
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Article name in the collection
METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU
ISBN
978-80-87294-67-3
ISSN
—
e-ISSN
—
Number of pages
6
Pages from-to
501-506
Publisher name
Tanger
Place of publication
Ostrava
Event location
Brno
Event date
May 25, 2016
Type of event by nationality
EUR - Evropská akce
UT code for WoS article
—