ABS Nanocomposites for Advanced Technical and Biomedical Applications
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989592%3A15310%2F25%3A73630521" target="_blank" >RIV/61989592:15310/25:73630521 - isvavai.cz</a>
Alternative codes found
RIV/70883521:28110/25:63589398 RIV/61989100:27230/25:10257645
Result on the web
<a href="https://www.mdpi.com/2073-4360/17/7/909" target="_blank" >https://www.mdpi.com/2073-4360/17/7/909</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.3390/polym17070909" target="_blank" >10.3390/polym17070909</a>
Alternative languages
Result language
angličtina
Original language name
ABS Nanocomposites for Advanced Technical and Biomedical Applications
Original language description
This study investigated the mechanical, thermal, and morphological properties of acrylonitrile butadiene styrene (ABS)-based nanocomposites reinforced with different types and concentrations of nanofillers. The uniaxial tensile testing results indicated that Young’s modulus (E) generally decreased with increasing filler content, except at 0.500 w.% filler concentration, where a slight increase in stiffness was observed. A statistically significant interaction between sample type and filler concentration was identified (p = 0.045). Fracture toughness measurements revealed a significant reduction in impact resistance at 1.000 w.% filler concentration, with values dropping by up to 67% compared with neat acrylonitrile butadiene styrene. Dynamic mechanical vibration testing confirmed a decrease in stiffness, as evidenced by a shift of the first resonance frequency (fR1) to lower values. Hardness measurements including indentation and Shore D hardness exhibited an increasing trend with rising filler concentration, with statistically significant differences observed at specific concentration levels (p < 0.05). Scanning electron microscopy analysis showed that nanofillers were well dispersed at lower concentrations, but agglomeration began above 0.500 w.%, resulting in void formation and a noticeable decline in mechanical properties. The results suggest that an optimal filler concentration range of 0.250–0.500 w.% offers an ideal balance between enhanced mechanical properties and material integrity.
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
10403 - Physical chemistry
Result continuities
Project
Result was created during the realization of more than one project. More information in the Projects tab.
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2025
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Polymers
ISSN
2073-4360
e-ISSN
2073-4360
Volume of the periodical
17
Issue of the periodical within the volume
7
Country of publishing house
CH - SWITZERLAND
Number of pages
15
Pages from-to
"909-1"-"909-15"
UT code for WoS article
001464799700001
EID of the result in the Scopus database
2-s2.0-105002274337