Verifying the Lifting and Slewing Dynamics of a Harvester Crane with Possible Levelling When Operating on Sloping Grounds

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F22%3A43921241" target="_blank" >RIV/62156489:43410/22:43921241 - isvavai.cz</a>

Alternative codes found

RIV/00216305:26210/22:PU143606

Result on the web

<a href="https://doi.org/10.3390/f13020357" target="_blank" >https://doi.org/10.3390/f13020357</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/f13020357" target="_blank" >10.3390/f13020357</a>

Result language

angličtina

Original language name

Verifying the Lifting and Slewing Dynamics of a Harvester Crane with Possible Levelling When Operating on Sloping Grounds

Original language description

This paper focuses on the force and torque load of a harvester hydraulic crane employed on sloping grounds, both levelled and not levelled. Field research was conducted for this purpose and the results were compared with a dynamic analysis of the crane in MSC Adams. It was found that levelling the slewing platform of the crane is necessary for use on sloping grounds, primarily because the effect on the force and lifting torques is reduced. The research showed that when the slope of the slewing gear is up to MINUS SIGN 12o, the lifting torque reaches a higher maximum lifting force than when the slewing gear is in a horizontal position (0o). As part of the theoretical verification by a dynamic analysis of the crane and the AH6 machine, a different pressure was detected in the lifting cylinder of the crane compared to the field research. The total deviation between the simulation and the field research was 9.82%. The slewing torque of the hydraulic crane without the slewing bearing being levelled can be characterized 97.38% by a parabola whose vertex is located in front of the front part of the machine and falls as the crane moves left or right. Overall, it can be determined that when the crane rotates up a slope, whether it is from left or right, the slewing torque reaches the lowest values, and its value increases as the crane gets closer to the front of the machine (along the longitudinal axis of the machine). This change in the slewing torque is then characterized by a parabola. Furthermore, an effect was observed of the slewing gear slope on the lifting torque, which reached higher values in a tilted position than on a flat surface.

Czech name

—

Czech description

—

Type

J_imp - Article in a specialist periodical, which is included in the Web of Science database

CEP classification

—

OECD FORD branch

20301 - Mechanical engineering

Project

—

Continuities

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Publication year

2022

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Forests

ISSN

1999-4907

e-ISSN

1999-4907

Volume of the periodical

13

Issue of the periodical within the volume

2

Country of publishing house

CH - SWITZERLAND

Number of pages

20

Pages from-to

357

UT code for WoS article

000822427500001

EID of the result in the Scopus database

2-s2.0-85125318062