PREPARATION OF BELITE CEMENT WITH HIGH CONTENT OF ß-BELITE AND PROPERTIES OF MORTAR ON ITS BASE
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62243136%3A_____%2F19%3AN0000040" target="_blank" >RIV/62243136:_____/19:N0000040 - isvavai.cz</a>
Result on the web
<a href="https://www.icct.cz/AngiologyKlon-ICCT/media/system/2019/ICCT-2019-Proceedings.pdf" target="_blank" >https://www.icct.cz/AngiologyKlon-ICCT/media/system/2019/ICCT-2019-Proceedings.pdf</a>
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
PREPARATION OF BELITE CEMENT WITH HIGH CONTENT OF ß-BELITE AND PROPERTIES OF MORTAR ON ITS BASE
Original language description
In the last few years it has been desirable to lower CO2 emissions from construction material production because of climate change. One way to reduce CO2 emissions is to produce cements which have belite (dicalcium silicate) as a main component instead of alite (tricalcium silicate), which is a major component of Portland cement. The production of cement with a high ß-belite content consisted of mixing ground limestone with thermal silica and with potassium water glass, then compacting the raw material mixture and firing it in an electric furnace at 1100 °C. The firing temperature used is over 300 °C less than the temperature needed to produce Portland cement. The mortar was prepared by mixing belite cement, water and quartz sand. The mechanical properties and frost resistance were determined after the hardening of the mortar. The hardened mortar showed a compressive strength of 13 MPa and flexural strength of 4 MPa after a year of curing. The hardened mortar resisted more than 80 freezing cycles in the frost resistance test.
Czech name
—
Czech description
—
Classification
Type
D - Article in proceedings
CEP classification
—
OECD FORD branch
20501 - Materials engineering
Result continuities
Project
<a href="/en/project/LO1606" target="_blank" >LO1606: Development of the UniCRE centre</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2019
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Article name in the collection
PROCEEDINGS of the 7th International Conference on Chemical Technology
ISBN
978-80-88307-00-6
ISSN
—
e-ISSN
—
Number of pages
5
Pages from-to
135-139
Publisher name
Czech Society of Industrial Chemistry
Place of publication
Praha
Event location
Mikulov
Event date
Jan 1, 2019
Type of event by nationality
EUR - Evropská akce
UT code for WoS article
000515696600024