A Glass Ceramic Derived from High TiO2-Containing Slag ? Microstructure Development and Mechanical Behaviour
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F06%3A00041201" target="_blank" >RIV/68081723:_____/06:00041201 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
A Glass Ceramic Derived from High TiO2-Containing Slag ? Microstructure Development and Mechanical Behaviour
Original language description
A novel glass?ceramic material was developed from the melt of a TiO2-containing iron-making slag with additional waste glass. The high percentage (20 wt%TiO2) of this network-modifying oxide has promoted a crystallization of the parent glass, resulting in a fine-grained, homogeneous polycrystalline material with high mechanical properties (E = 120 GPa, flexural strength = 180 MPa, and Vickers hardness 57 GPa) after a heat treatment at 1100°C for 2 h. The room temperature and elevated temperature fracture toughness were also studied. The main crystalline phases of the glass?ceramic material were of the pyroxene series until heat-treatment temperature reached 1000°C, at which titanium rich perovskite and armalcolite crystals became the dominant phases. The end material is high-strength, aesthetically acceptable (metallic gray or opaque brown colored), and suitable for structural and architectural applications.
Czech name
Skelná keramika ze strusek bohatých na TiO2 ? vývoj mikrostruktury a mechanické vlastnosti
Czech description
Z železnorudné strusky bohaté na TiO2 a skleněného odpadu byl vyvinut nový materiál na bázi skelné keramiky. Vysoký obsah oxidu usnadnil krystalizaci výchozí skelné matrice a po žíhání při 1100°C po dobu 2 h vedl k jemnozrnnému polykrystalickému materiálu s vysokými mechanickými vlastnostmi (E = 120 MPa, pevnost v ohybu 180 MPa, Vickersova tvrdost 57 GPa). Sledována byla rovněž lomová houževnatost při pokojové teplotě a při zvýšené teplotě. Hlavní krystalickou fází obsaženou ve skelné keramice po uvedeném zpracování (při teplotách nad 1000°C) byly krystaly perovskitu a armalcolitu bohaté na Ti. Výsledný materiál je vysoce pevný, esteticky zajímavý (kovově šedý, resp. s hnědým opaleskujícím nádechem) a vhodný pro konstrukční a stavební aplikace.
Classification
Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JH - Ceramics, fire-proof materials and glass
OECD FORD branch
—
Result continuities
Project
Result was created during the realization of more than one project. More information in the Projects tab.
Continuities
Z - Vyzkumny zamer (s odkazem do CEZ)
Others
Publication year
2006
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Journal of the American Ceramic Society
ISSN
1551-2916
e-ISSN
—
Volume of the periodical
89
Issue of the periodical within the volume
8
Country of publishing house
US - UNITED STATES
Number of pages
8
Pages from-to
2426-2433
UT code for WoS article
—
EID of the result in the Scopus database
—