Cement Composite Reinforced with Synthetic Fibers: Comparison of Three-point and Four-point Bending Test Results
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F16%3A00239484" target="_blank" >RIV/68407700:21110/16:00239484 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.4028/www.scientific.net/AMM.827.332" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/AMM.827.332</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.4028/www.scientific.net/AMM.827.332" target="_blank" >10.4028/www.scientific.net/AMM.827.332</a>
Alternative languages
Result language
angličtina
Original language name
Cement Composite Reinforced with Synthetic Fibers: Comparison of Three-point and Four-point Bending Test Results
Original language description
Presented article deals with the influence of PET fiber production on the bending strength of cement-based composite when incorporated into the fresh mortar, and comparison of results of 3-point and 4-point bending test. Cement paste samples were reinforced with 2 wt. % of primary or recycled PET fibers. The bending test was performed on prismatic samples with dimension of 40 x 40 x 160 mm. It was found that samples with recycled PET fibers, compared to primary ones, exhibit a decrease in bending strength. In the case of 4-point bending tests, the samples with recycled PET fibers exhibited higher bending strength than reference samples without any fibers. However, in the case of 3-point bending tests, the samples with recycled PET fibers had lower bending strength than the reference ones. The results suggest that recycled PET fibers could be used as an alternative to reinforce cement-based composites.
Czech name
—
Czech description
—
Classification
Type
D - Article in proceedings
CEP classification
JN - Civil engineering
OECD FORD branch
—
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Article name in the collection
Applied Methods of the Analysis of Static and Dynamic Loads of Structures and Machines II
ISBN
978-3-03835-531-1
ISSN
1660-9336
e-ISSN
—
Number of pages
4
Pages from-to
332-335
Publisher name
TRANS TECH PUBLICATIONS LTD
Place of publication
Zurich
Event location
Český Krumlov
Event date
Jun 1, 2015
Type of event by nationality
WRD - Celosvětová akce
UT code for WoS article
—