RECOMMENDED PROCEDURE FOR HEADROOM DESIGN ACCORDING TO GEOMETRIC PARAMETERS OF BUILDING STRUCTURES

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F22%3A00361947" target="_blank" >RIV/68407700:21110/22:00361947 - isvavai.cz</a>

Result on the web

<a href="https://doi.org/10.14311/AP.2022.62.0654" target="_blank" >https://doi.org/10.14311/AP.2022.62.0654</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.14311/AP.2022.62.0654" target="_blank" >10.14311/AP.2022.62.0654</a>

Result language

angličtina

Original language name

RECOMMENDED PROCEDURE FOR HEADROOM DESIGN ACCORDING TO GEOMETRIC PARAMETERS OF BUILDING STRUCTURES

Original language description

The system of Czech technical standards for geometric accuracy assumes that the designer determines the functional geometric parameters for a specific building. By calculation, he verifies them in the so-called “geometric plan” in the project documentation. The functional geometric parameters should be determined primarily for critical elements, i.e. for structures whose geometric accuracy is important for the execution of subsequent works, such as technologies requiring high precision and specific structures. The assumption is that designers will incorporate variations in geometric accuracy primarily in the development of the spatial parameters of the structures, which should ensure that the dimensional requirements for the completed structures will be met. One of these parameters is headroom. The design of headroom must respect the minimum height requirements prescribed by legislation, and where appropriate, by technical standards. At the same time, the design must respect the technological possibilities of the construction of individual structures – geometric deviations. To comply with the dimensional requirements for the completed structures, the geometric accuracy deviations should be determined in accordance with the requirements of the technical standards for the execution of the individual parts of the building structures and/or for their design. The aim of this article is to establish a calculation procedure for determining the safe design clearance so that the requirements of the legislation are met after implementation. The increase is determined based on a calculation procedure of the limiting geometric deviations that may affect the resulting headroom.

Czech name

—

Czech description

—

Type

J_SC - Article in a specialist periodical, which is included in the SCOPUS database

CEP classification

—

OECD FORD branch

20101 - Civil engineering

Project

—

Continuities

S - Specificky vyzkum na vysokych skolach

Publication year

2022

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Name of the periodical

Acta Polytechnica

ISSN

1210-2709

e-ISSN

1805-2363

Volume of the periodical

Vol. 62

Issue of the periodical within the volume

No. 6

Country of publishing house

CZ - CZECH REPUBLIC

Number of pages

6

Pages from-to

654-659

UT code for WoS article

—

EID of the result in the Scopus database

2-s2.0-85147976023