The Characteristics of Glued Tensile Shear Strength Constituted of Wood Cut by CO2 Laser
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F23%3A00374320" target="_blank" >RIV/68407700:21110/23:00374320 - isvavai.cz</a>
Result on the web
<a href="https://doi.org/10.32604/jrm.2023.028352" target="_blank" >https://doi.org/10.32604/jrm.2023.028352</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.32604/jrm.2023.028352" target="_blank" >10.32604/jrm.2023.028352</a>
Alternative languages
Result language
angličtina
Original language name
The Characteristics of Glued Tensile Shear Strength Constituted of Wood Cut by CO2 Laser
Original language description
The performance of engineered wood products is highly associated with proper bonding and an efficient cutting method. This paper investigates the influence of CO2 laser cutting on the wetting properties, the modified chemical component of the laser-cut surface, and the strength and adhesive penetration near the bondline. Beechwood is cut by the laser with varying processing parameters, cutting speeds, gas pressures, and focal point positions. The laser-cut samples were divided into two groups, sanded and non-sanded samples. Polyvinyl acetate adhesive (PVAc) was used to bond the groups of laser-cut samples. After assembly with cold pressing, the tensile shear test was carried out. Numerical modelling was carried out to determine the partial elongation and shear strain of the glue line. Based on this, the shear modulus and linear elasticity of the glue line were estimated. Scanning electron microscopy was used to assess the adhesive penetration into the porosity structure of the laser-cut samples, and the depth of the heat-affected zone. The laser-cut surface was analysed by Fourier transform infrared spectroscopy. The wetting properties of the laser-cut surface were investigated by using a contact angle goniometer. The numerical model of the strain-stress curve confirmed the experimental model. The highest modulus of the linear elasticity of the glue in the numerical calculation belongs to the joint containing laser-cut samples at a gas pressure of 21 (bar). The penetration depth of PVAc adhesive into the porosity structure of the laser-cut samples was similar to that of sawn samples. The deepest heat-affected zone in the laser-cut samples was 150 µm. A PVAc drop disappeared immediately on the laser-cut surface without sanding, but gradually on the sanded This work is licensed under a Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. DOI: 10.32604/jrm.2023.028352 ARTICLE Tech Science Press Published Online: 18 May 2023 surface. In contrast, the drop on the sawn surface remained with an angle of 32°–48°. The degradation of hemicellulose and lignin was proven by the lower intensity of the C=O and C-O Bonds, compared to the sawn surface.
Czech name
—
Czech description
—
Classification
Type
J<sub>SC</sub> - Article in a specialist periodical, which is included in the SCOPUS database
CEP classification
—
OECD FORD branch
20502 - Paper and wood
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2023
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Journal of Renewable Materials
ISSN
2164-6325
e-ISSN
2164-6341
Volume of the periodical
11
Issue of the periodical within the volume
8
Country of publishing house
US - UNITED STATES
Number of pages
20
Pages from-to
3277-3296
UT code for WoS article
—
EID of the result in the Scopus database
2-s2.0-85164033170