Control of droplet size in rain-zone in wet cooling tower

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F18%3A00329528" target="_blank" >RIV/68407700:21220/18:00329528 - isvavai.cz</a>
Result on the web
<a href="https://www.epj-conferences.org/articles/epjconf/abs/2018/15/epjconf_efm2018_02119/epjconf_efm2018_02119.html" target="_blank" >https://www.epj-conferences.org/articles/epjconf/abs/2018/15/epjconf_efm2018_02119/epjconf_efm2018_02119.html</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1051/epjconf/201818002119" target="_blank" >10.1051/epjconf/201818002119</a>

Result language
angličtina
Original language name
Control of droplet size in rain-zone in wet cooling tower
Original language description
The performance of the wet cooling tower is significantly affected by the droplet size occurring in the rain zone. In order to effectively manage the size of these droplets, it was necessary to experimentally determine the effect of the fills of the cooling towers on droplets. Five types of cooling fillers were used for experimental measurements: 3 film fills and 2 splash fills - trickle and grid. Drop size measurements were performed using the LIF method. Histograms of droplets size were obtained from measured droplet sizes under each fill, and for each fill, the Sauter droplet diameter was then calculated. According to a theoretical analysis of a breakdown of droplets, the combinations of some fills and the effect of their surface treatment on the droplet diameter were then measured for comparison.
Czech name
—
Czech description
—

Project
<a href="/en/project/TE01020036" target="_blank" >TE01020036: Advanced technologies for heat and electricity production</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year
2018
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)