Numerical study on the convective heat transfer performance of a developed MXene IoNanofuid in a horizontal tube by considering temperature-dependent properties
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F22%3A00358564" target="_blank" >RIV/68407700:21220/22:00358564 - isvavai.cz</a>
Result on the web
<a href="https://doi.org/10.1007/s10973-022-11414-4" target="_blank" >https://doi.org/10.1007/s10973-022-11414-4</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1007/s10973-022-11414-4" target="_blank" >10.1007/s10973-022-11414-4</a>
Alternative languages
Result language
angličtina
Original language name
Numerical study on the convective heat transfer performance of a developed MXene IoNanofuid in a horizontal tube by considering temperature-dependent properties
Original language description
In this study, the heat transfer performance of [MMI][DMP] ionic liquid solution (20 vol% IL+80 vol% deionized water) in the presence of Mxene nanoparticle is investigated based on computational fluid dynamics numerical method considering temperature-dependent properties. It should be noted that the thermophysical properties of IoNanofluid were experimentally measured in our previous published study. The modeling results are validated with numerical and experimental works, and the validation results indicate good agreement between them. The effect of adding Mxene nanoparticle to the base liquid was carried out in a horizontal tube with 1–50 range of Reynolds number. The results found that the heat transfer coefficient increased by increasing the Reynolds number and also the nanofluids’ concentration. Moreover, it raises by increasing the fluid inlet temperature while the Nu number decreases. This is because the Nusselt number is in a reverse relationship with the heat transfer coefficient. The maximum heat transfer coefficient observed for 0.2 mass% INf at 308 K fluid inlet temperature and Reynolds number of 50 was 2207.83 W m2 K-1. However, the maximum Nusselt number detected for pure base fluid at 298.15 K fluid inlet temperature and Reynolds number of 50 was 13.22. Furthermore, the maximum heat transfer enhancement was observed for 0.2 mass% INf at Reynolds number of 50 and 308.15 K fluid inlet temperature (43.6%). Finally, a novel correlation is proposed to estimate the Nusselt number of nanofluids with R2=0.992 and AREP=2.8%.
Czech name
—
Czech description
—
Classification
Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20303 - Thermodynamics
Result continuities
Project
—
Continuities
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Others
Publication year
2022
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Journal of Thermal Analysis and Calorimetry
ISSN
1388-6150
e-ISSN
1588-2926
Volume of the periodical
2022
Issue of the periodical within the volume
06
Country of publishing house
HU - HUNGARY
Number of pages
12
Pages from-to
12067-12078
UT code for WoS article
000817006300002
EID of the result in the Scopus database
2-s2.0-85132949324