Analysis of influence dimensions of the gate on the homogeneity of the low weight castings made of silumin
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F75081431%3A_____%2F17%3A00001125" target="_blank" >RIV/75081431:_____/17:00001125 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Analysis of influence dimensions of the gate on the homogeneity of the low weight castings made of silumin
Original language description
The design of the gating system is a major factor in the internal homogeneity for casting. A properly designed system should ensure a proper and continuous filling of cavities in a mold. A continuous filling in a mold cavity gives the initial condition for internal soundness and homogeneity when casting, which in turn is reflected in the quality and mechanical properties. The geometry and shape of the gate models and directs the melt stream entering the mold cavity, this greatly affect the properties of the castings. Homogeneity of castings closely correlates with the mechanical properties of castings. The present paper is devoted to analyzing the effect of the dimensions of the inlet slit on the homogeneity of the casting. As the width of the gully is constant according to the design method of the ingate systems, the variable parameter was the height of the gate. The aim of the experiments was to find the most advantageous height of the gate that is necessary to achieve the lowest porosity values. The boundary values of the height of the gate were determined based on the numerical design of the ingate system for the particular casting and the NovaFlow & Solid simulation program. The porosity analysis f was performed by the OLYMPUS GX51 microscope and the evaluation of the samples was carried out using the ImageJ computer program.
Czech name
—
Czech description
—
Classification
Type
J<sub>SC</sub> - Article in a specialist periodical, which is included in the SCOPUS database
CEP classification
—
OECD FORD branch
20501 - Materials engineering
Result continuities
Project
—
Continuities
V - Vyzkumna aktivita podporovana z jinych verejnych zdroju
Others
Publication year
2017
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Manufacturing technology
ISSN
1213-2489
e-ISSN
—
Volume of the periodical
17
Issue of the periodical within the volume
4
Country of publishing house
CZ - CZECH REPUBLIC
Number of pages
4
Pages from-to
499-502
UT code for WoS article
—
EID of the result in the Scopus database
2.0-85029564203