Filters
Improvement in Flatness Control in Cold Rolling of the Transformer Steel Strips
One of the most important parameters of cold rolled grain oriented strips is their final flatness. Cold rolled strips flatness is influeced by cold rolling conditions. There is descibed technical knowledge...
JG - Hutnictví, kovové materiály
- 2008 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
FLATNESS, CONTROL OF FLATNESS AND CROSS SECTION OF HOT ROLLED AND COLD ROLLED TRANSFORMER STEEL STRIPS
One of the most important parameters for cold rolled grain oriented strips is their final flatness. Cold rolled strip flatness is not only influenced by cold rolling conditions, but also by dimensional par...
JG - Hutnictví, kovové materiály
- 2007 •
- D
Rok uplatnění
D - Stať ve sborníku
Effect of rolls shape, deflection and flattening on rolled strip tolerence and flatness
The paper is devoted to the solution of problems with the quality of cold rolled strips. The gauge tolerences and flatness are two parameters, with work on strip quality. They depend on roll gap shape at single draft of
JB - Senzory, čidla, měření a regulace
- 2005 •
- D
Rok uplatnění
D - Stať ve sborníku
The computer simulation of flat rolling processes
The computer simulation of flat rolling processes...
JG - Hutnictví, kovové materiály
- 1999 •
- D
Rok uplatnění
D - Stať ve sborníku
Simulation of the flat bars and equal angles at laboratory mill Tandem
The rolling of flat bars and equal angles have been simulated on the two-stand laboratory rolling mill TANDEM. Two types of microalloyed steels, and four different types of controlled rolling according real rol...
JG - Hutnictví, kovové materiály
- 2002 •
- D
Rok uplatnění
D - Stať ve sborníku
Cross section and flatness of hot rolled strips
Description of computational models necessary for calculation of strip profile and bending forces that create base of the sotware for control of profile and flatness of hot rolled strip. Implementation of these models into the Level...
JG - Hutnictví, kovové materiály
- 2005 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Potentialities of Physical Modelling of Flat Rolling Processes at VŠB - Technical University of Ostrava
Potentialities of Physical Modelling of Flat Rolling Processes at VŠB - Technical University of Ostrava...
JG - Hutnictví, kovové materiály
- 2001 •
- D
Rok uplatnění
D - Stať ve sborníku
Simulation of Sheet Bars Cooling in Conditions of Medium-Section Rolling Mill of ISPAT Nová Huť a. s
Beyond rod steel, especially flat bars and shaped bars are rolled in Medium-Section rolling mill of ISPAT NOVÁ HUŤ a.s. The GOLEM equipment is used for direct cooling of rod steel. This equipment isn't usable for direct coo...
JG - Hutnictví, kovové materiály
- 2004 •
- D
Rok uplatnění
D - Stať ve sborníku
Computer simulation of flat and shape bars accelerated cooling in condition of medium-section rolling mill of ISPAT NOVÁ HUŤ a.s.
Beyond rod steel, flat bars and shaped bars are rolled in Medium-Section rolling mill of ISPAT NOVÁ HUŤ a.s. The GOLEM equipment is used for direct cooling of rod steel. This equipment isn't usable for direct cooling of
JG - Hutnictví, kovové materiály
- 2005 •
- D
Rok uplatnění
D - Stať ve sborníku
Residual Stresses at Flats and Rolled Sections
The paper is devoted to the problems of residual stresses at the products after rolling of flats and rolled sections. Residual stresses influence the allowable load and life of products....
JL - Únava materiálu a lomová mechanika
- 2003 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 9 977