Filters
Comparison of fatigue properties using 2-point and 4 point bending - Czech experience
In this paper two different methodologies of fatigue testing as used imn the Czech Republic have been compared. Fatigue tests on selected Asphlat Concrete mixtrues (AC) have been done using by two Point Bending (2P...
JN - Stavebnictví
- 2012 •
- D •
- Link
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
Clip for test four - point bend
Construction preparation for examination curved beam with transformation base...
JL - Únava materiálu a lomová mechanika
- 2011 •
- Fuzit •
- Link
Rok uplatnění
Fuzit - Užitný vzor
Výsledek na webu
Creep of glued laminated timber beams during four-point bending test
Glued laminated timber beams were subjected to destructive testing in four point bending test. Three deflections (at the mid-span of the beam, and below the points of load applic...
JM - Inženýrské stavitelství
- 2015 •
- D
Rok uplatnění
D - Stať ve sborníku
Fixture for Measurement of Displacements at Testing of Sandwich Beams in Bending
The fixture consists of supports with variable distance and bearing jig. The device allows three and four point bending of sandwich beams in the testing machine. The vertical and horizontal displacements a...
JI - Kompositní materiály
- 2008 •
- Gfunk
Rok uplatnění
Gfunk - Funkční vzorek
The introduction of experiments intended to identify material parameters into Structural Mechanics courses
of such problems (three- and four-point bending tests of concrete beams without notch, three-point bending test of concrete beams with a notch and wedge-splitting t...
JN - Stavebnictví
- 2014 •
- D
Rok uplatnění
D - Stať ve sborníku
Advanced Methods for Design, Strengthening and Evaluation of Glued Laminated Timber 2015
A group of eleven glued laminated timber beams was tested in four-point bending until failure. Both standard measuring devices mounted to the beams and digital cameras were employed to provide for...
JM - Inženýrské stavitelství
- 2016 •
- Vsouhrn
Rok uplatnění
Vsouhrn - Souhrnná výzkumná zpráva
Statistical evaluation of three and four-point bending tests of FRC
Paper compares and discusses three-point bending and four-point bending tests of fiber reinforced beams. A numerical modeling, stochastic and statistical analysis are used to determine, w...
JM - Inženýrské stavitelství
- 2015 •
- D •
- Link
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
Bending Tests and Load-Deflection Diagrams of Fibre Reinforced Concrete with Recycled Aggregate
The article deals with four-point bending test of beams made from fibre reinforced concrete with recycled aggregate and output of this test the load-deflection diagram. The differences between lon...
JN - Stavebnictví
- 2013 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Statistical Comparison of Three-Point and Four-Point Bending Tests of Fiber Reinforced Concrete
Paper compares and discusses three-point bending and four-point bending tests of fiber reinforced beams. A numerical modeling, stochastic analysis and statistical analysis are used to det...
JM - Inženýrské stavitelství
- 2015 •
- O •
- Link
Rok uplatnění
O - Ostatní výsledky
Výsledek na webu
Statistical Comparison of Three-Point and Four-Point Bending Tests of Fiber Reinforced Concrete
Paper compares and discusses three-point bending and four-point bending tests of fiber reinforced beams. A numerical modeling, stochastic analysis and statistical analysis are used to det...
JM - Inženýrské stavitelství
- 2015 •
- D •
- Link
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
- 1 - 10 out of 233 009