Filters
The effect of structure on mechanical properties of titanium alloys Ti-6Al-4V and Ti-3Al-2,5V
and mechanical properties of alpha-beta titanium alloys of the type Ti-3Al-2,5V and Ti-6Al-4V of titanium alloy Ti-6Al-4V made by electron beam weldin...
JG - Hutnictví, kovové materiály
- 1999 •
- D
Rok uplatnění
D - Stať ve sborníku
Microstructural changes in Ti and its alloy Ti-6Al-4V in interaction with tribological properties
The objective of this study is to define the optimum degree of structural stability of alpha-beta titanium alloy Ti-6Al-4V in metastable pseudo-beta state, that meets the requirements essential for the tec...
JJ - Ostatní materiály
- 2011 •
- C
Rok uplatnění
C - Kapitola v odborné knize
Hydrophobic coating of Ti-6Al-4V titanium alloys
and its influence on elimination of icing on metals, namely on titanium alloy Ti-6Al-4V. Technological process of antifreeze coating on titanium alloy Ti-6Al-4V
Coating and films
- 2019 •
- Gfunk •
- Link
Rok uplatnění
Gfunk - Funkční vzorek
Výsledek na webu
Elements Distribution and Morphology of Ti-6Al-4V Structure
Work deal with the microstructure analysis of titanium alloy Ti-6Al-4V. Structure and distribution of chemical elements are described by meaning of Scanning Electron Microscopy (SEM) and Energy Dispersive ...
JJ - Ostatní materiály
- 2010 •
- D
Rok uplatnění
D - Stať ve sborníku
Influence of the rolling parameters on a Ti-6Al-4V alloy notch toughness
with properties of quality certificated Ti- 6Al-4V alloy. Influence of the rolling parametersThis article deals with preparation of titanium alloy with commercial mark Ti-6Al-
JG - Hutnictví, kovové materiály
- 2002 •
- D
Rok uplatnění
D - Stať ve sborníku
Surface Characterization of Titanium Alloys for Nitrogen Ion Implantation
Ion implantation is one of the modern methods of the surface modification of various materials. Industrially used Ti–6Al–4V titanium alloy and commercially pure Ti grade 2 were characterized using...
Condensed matter physics (including formerly solid state physics, supercond.)
- 2017 •
- D •
- Link
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
Prototypes of implants of the 2nd set
All implants are made of titanium alloy Ti 6Al 4V. By combining these individual parts, various combinations can be created final implant....
Anatomy and morphology (plant science to be 1.6)
- 2019 •
- Gprot
Rok uplatnění
Gprot - Prototyp
Validation of Ti-6Al-4V Alloy Mechanical Behavior Models for Conditions of Impact Damage of Turbine Engine Fan Blade
The article describes a series of experiments and calculations for verification high-speed deformation behavior and fracture models for the titanium alloy Ti-6Al-4V. Samples made of the micro-and nanocryst...
JQ - Strojní zařízení a nástroje
- 2013 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Ti-6Al-4V alloy surface modification for medical applications
The objective of the presented work was to compare the properties of the two surface modifications of Ti-6Al-4V alloy. In the first case, a nanostructure of a tube character was constructed electrochemically under ...
JK - Koroze a povrchové úpravy materiálu
- 2012 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
High susceptibility of 3D-printed Ti-6Al-4V alloy to hydrogen trapping and embrittlement
implants. However, in this paper, we demonstrate a high susceptibility of 3D-printed Ti-6Al-4V alloy to hydrogen trapping and embrittlement supported by its specific microstructure. 3D-printed (Selective Laser Mel...
Condensed matter physics (including formerly solid state physics, supercond.)
- 2021 •
- Jimp •
- Link
Rok uplatnění
Jimp - Článek v periodiku v databázi Web of Science
Výsledek na webu
- 1 - 10 out of 22 174