Filters
Metallographic analysis of special eutectic and hypereutectic Al-Si alloys
Eutectic and hypereutectic Al-Si alloys create specific groups of Al-Si alloys and they are also used for specific applications. In context of that there are high demands on description o...
Materials engineering
- 2017 •
- O
Rok uplatnění
O - Ostatní výsledky
High-Strength Ultra-Fine-Grained Hypereutectic Al-Si-Fe-X (X = Cr, Mn) Alloys Prepared by Short-Term Mechanical Alloying and Spark Plasma Sintering
In this work, Al-20Si-10Fe-6Cr and Al-20Si-10Fe-6Mn (wt %) alloys were prepared by a combination of short-term mechanical alloying and spark plasma sintering. The microstructure was composed of homogeneously disper...
JG - Hutnictví, kovové materiály
- 2016 •
- Jx •
- Link
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
INOCULANTING OF ALSI7MG0,3 ALLOY AND ITS INFLUENCE ON THE STRUCTURE
when shrinkage. Hypoeutectic and hypereutectic alloys Al-Si are inoculatedCasting Al-Si alloys in engineering practice called silumin are nowadays often. Other importantadvantages of the...
JG - Hutnictví, kovové materiály
- 2011 •
- D
Rok uplatnění
D - Stať ve sborníku
Formation of Hypereutectic Aluminium-based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings
of Al-Ni hypereutectic alloys originated up to the temperature of 900oCThe contribution is focused on hypereutectic alloys or nickel aluminides/cooling rate of the samples of 5oC / min was set up. The
JG - Hutnictví, kovové materiály
- 2012 •
- O •
- Link
Rok uplatnění
O - Ostatní výsledky
Výsledek na webu
Formation of Hypereutectic Aluminium Alloy from Sacrificial Nickel Coating Investigated by Differential Thermal and Microstructural Analysis
hypereuectic aluminium alloy was investigated by using differential thermal analysis, metalography and scanning compare the results obtained. The microstructure of Al-Ni hypereutectic alloy is of aluminium matrix ...
JI - Kompositní materiály
- 2011 •
- O
Rok uplatnění
O - Ostatní výsledky
Metallography of Fractured Aluminium Alloys for the Transmission System’s Elements
The metallography was used for evaluation of fractured elements from different aluminium alloys´ elements applied in Czech transmission system. Although the fractured elements were produced from different aluminium alloys (hyper...
Electrochemistry (dry cells, batteries, fuel cells, corrosion metals, electrolysis)
- 2023 •
- JSC •
- Link
Rok uplatnění
JSC - Článek v periodiku v databázi SCOPUS
Výsledek na webu
The Identification of the structures new type Al-Si-Mg Ca alloys with different Ca content using of the color metallography
new structures of aluminium alloys. For experimental purposes aluminium alloy from the group hypereutectic AlSi7Mg 0,3 silumins was used. Alloy and modified using calcium in the form of master alloy AlCa1...
JR - Ostatní strojírenství
- 2012 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
The Identification of the structures new type Al-Si-Mg Ca alloys with different Ca content using of the color metallography.
new structures of aluminium alloys. For experimental purposes aluminium alloy from the group hypereutectic AlSi7Mg 0,3 silumins was used. Alloy and modified using calcium in the form of master alloy AlCa1...
JR - Ostatní strojírenství
- 2012 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Formation of intermediary phases during reactive sintering production of Ti-Al and Ti-Al-Si alloys
Formation of intermediary phases during reactive sintering production of Ti-Al and Ti-Al-Si alloys...
JG - Hutnictví, kovové materiály
- 2008 •
- D
Rok uplatnění
D - Stať ve sborníku
The influence of Sr-modification on the structure of directionally solidified Al-Si alloy
The influence of Sr-modification on the structure of directionally solidified Al-Si alloy...
CA - Anorganická chemie
- 2001 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
- 1 - 10 out of 32 445