Filters
Application of Master curve approach to irradiated steels
The Master Curve approach is being introduced in the evaluation of the fracture toughness of low-alloy ferritic steels used in reactor pressure vessels....
JF - Jaderná energetika
- 2004 •
- D
Rok uplatnění
D - Stať ve sborníku
Application of master curve concept for evaluation of load rate influence on transition fracture behavior of steels.
An influence of load rate on a master curve shape and its temperature position has been studied. Tests have been carried out on a set of specimens from 2,25Cr-1Mo steel at 6 load rates. The validity of master curve...
JL - Únava materiálu a lomová mechanika
- 2002 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
THE EFFECT OF STRAIN RATE ON MASTER CURVE OF THE MARTENSITIC CHROMIUM STEEL
The effect of the strain rate on master curve of the martensitic chromium steel was examined. The tests were performed in both quasi-static and dynamic conditions. The pre-cracked Charpy V specimens were used in the test to allow to...
Audio engineering, reliability analysis
- 2018 •
- D
Rok uplatnění
D - Stať ve sborníku
Master curve methodology and fracture behaviour of the cast steel.
Original scientific paper dealing with Master curve methodology and fracture behaviour of the cast steel.
JL - Únava materiálu a lomová mechanika
- 1998 •
- D
Rok uplatnění
D - Stať ve sborníku
Evaluation of strain rate effects on transition behaviour applying the master curve methodology
The paper in the book describes the influence of loading rate on the transition behaviour of materials by the shift of so called "master curve". The value of this shift was predicted on the basis of physical considerations and then ...
JL - Únava materiálu a lomová mechanika
- 2002 •
- C
Rok uplatnění
C - Kapitola v odborné knize
Strain Rate Effects, Transition Behaviour and Master Curve Concept.
The master curve methodology has been used for an evaluation of strain rate effects on transition behaviour of cast ferritic CrMo steel. The physical aspects of strain rate effect on reference temperature has been analysed as a base...
JL - Únava materiálu a lomová mechanika
- 2003 •
- D
Rok uplatnění
D - Stať ve sborníku
Evaluation of Strain Rate Effects on Transition Behaviour Applying the Master Curve Methodology.
The master curve methodology has been used for an evaluation of strain rate effects on transition behaviour of cast ferritic CrMo steel. The physical aspects of strain rate effect on reference temperature has been analysed as a base...
JL - Únava materiálu a lomová mechanika
- 2002 •
- C
Rok uplatnění
C - Kapitola v odborné knize
Remarks to the upper shelf master curve concept
The upper shelf master curve concept can be deduced from constitutive properties of material.
JF - Jaderná energetika
- 2009 •
- D
Rok uplatnění
D - Stať ve sborníku
Statistical and physical aspects of the use of master curve concept at assessment of loading rate effects on transition behavior.
The use of master curve at assessments of loading rate effects on fracture toughness transition behaviour. Independence of the master curve shape at different loading rates has been analysed based on measurements. ...
JL - Únava materiálu a lomová mechanika
- 2002 •
- D
Rok uplatnění
D - Stať ve sborníku
The possibility of master curve application for the evaluation of fracture toughness of the C-Mn cast steel.
Original scientific paper dealing with The possibility of master curve application for the evaluation of fracture toughness of the C-Mn cast steel....
JL - Únava materiálu a lomová mechanika
- 1999 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 19 174