Filters
Modelling of Micromechanical Phenomena in Cementitious Composites
The paper deals with micromechanical modeling of fibre reinforced cementitious composites, in particular modeling of a single fiber pullout....
JI - Kompositní materiály
- 2010 •
- D
Rok uplatnění
D - Stať ve sborníku
Pullout 1.0
Pullout is a program developed for evaluation of fiber-matrix interface parameters from so-called pullout test. The interaction is described using three parameters ? chemical bond, frictional stress and slip-hardening param...
JN - Stavebnictví
- 2014 •
- R •
- Link
Rok uplatnění
R - Software
Výsledek na webu
Procedure of pullout tests for FRP bars
Methodic of pullout tests is treated in step-by-step reference, regarding the most significant details. FRP (Fiber Reinforced Polymers) bars are treated nevertheless any other kind of reinforcement can be applied....
JI - Kompositní materiály
- 2007 •
- C
Rok uplatnění
C - Kapitola v odborné knize
Procedure of pullout tests for FRP bars
Methodic of pullout tests is treated in step-by-step reference, regarding the most significant details. FRP (Fiber Reinforced Polymers) bars are treated nevertheless any other kind of reinforcement can be applied....
JI - Kompositní materiály
- 2007 •
- D
Rok uplatnění
D - Stať ve sborníku
Modeling of High-Strength FRC Structural Elements with Spatially Non-Uniform Fiber Volume Fraction
of fiber debonding, pullout and crack-bridging. The concept of cohesive crack to numerically simulate performance of high strength fiber reinforced concrete (HSFRC) structural elements with given spatially variabl...
JN - Stavebnictví
- 2015 •
- Jx •
- Link
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
Large displacements pullout problem in FRC
In some cases of fiber reinforced concrete large displacement problem during pull out of fibres from concrete has to be solved. This problem brings several new necessities to be considered. Penalty method is employed with additional conditio...
JN - Stavebnictví
- 2005 •
- D
Rok uplatnění
D - Stať ve sborníku
Experimental Investigation of the Interface between Synthetic and Glass Fibers and Lime-Based Mortars
In this article, the cohesion between fiber reinforcement and lime-based mortar is experimentally investigated using so-called pullout test. The experiment is based on the progressive pulling out of the fiber from the matri...
JM - Inženýrské stavitelství
- 2016 •
- D •
- Link
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
Pull-out Problem of Special Fibers in Concrete
Progress in Structural Engineering, Mechanics and Computation...
JI - Kompositní materiály
- 2004 •
- D
Rok uplatnění
D - Stať ve sborníku
Single fiber pull-out test of nitinol-silicon textile composite
filaments into the silicon-polyester matrix. Nominal shear stress at debonding, debonding force, and spring constant characterizing fiber-matrix interface priorThis is preliminary report describing results of the single
JJ - Ostatní materiály
- 2012 •
- Jx •
- Link
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
Modeling of behaviour of fibers in composite materials under cyclic loading and unloading
This article deals with the behaviour of single fiber in composite materials. For modeling a single fiber's response during pulling from the surrounding matrix is used a new approach, including debonding and pulling-out
JN - Stavebnictví
- 2011 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 11 618