Filters
Accelerated creep tests of steels weld joint
ACT tests were realized in Gleeble 3800 plastometer with defined cyclic changes of temperature and strain (tension/compression)....
JG - Hutnictví, kovové materiály
- 2015 •
- Vsouhrn
Rok uplatnění
Vsouhrn - Souhrnná výzkumná zpráva
Investigation of the hot deformation behaviour of the CuCr0.6 alloy
described experiments were carried out with the use of the Gleeble 3800 plastometer.
Materials engineering
- 2019 •
- Jost •
- Link
Rok uplatnění
Jost - Ostatní články v recenzovaných periodicích
Výsledek na webu
Study of development of strain in plane strain compression test
limits and requires a special Gleeble plastometer. A prism-shaped sample heated, plastometric (PSCT) tests of 38MnVS6 microalloyed steel were carried out in Gleeble 3800 plastometer in the temperature ran...
JG - Hutnictví, kovové materiály
- 2011 •
- D
Rok uplatnění
D - Stať ve sborníku
The influence of a cooling rate on the evolution of microstructure and hardness of the steel 27MnCrB5
The aim of the performed experiments was to determine the influence of a cooling rate on the evolution of microstructure and hardness of the steel 27MnCrB5. By using dilatometric tests performed on the plastometer Gleeble 3800
Materials engineering
- 2018 •
- Jimp •
- Link
Rok uplatnění
Jimp - Článek v periodiku v databázi Web of Science
Výsledek na webu
Influence of temperature or deformation cycling on final grain size of low-carbon steel
The possibilities of the grain refinement of the low-carbon steel S355J2 were examined with using of the universal plastometer Gleeble 3800. The initial ferrite-pearlite structure was refinement by two ways. The first one c...
JG - Hutnictví, kovové materiály
- 2015 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Influence of Chemical Content of Steels on the Ms and Mf Temperatures
5 types of steel, which were differently alloyed with chromium, molybdenum and nickel, were examined. Determination of the temperatures martensite start temperature (Ms) and martensite finish (Mf) was performed by dilatometer with the use of the ...
JG - Hutnictví, kovové materiály
- 2016 •
- D
Rok uplatnění
D - Stať ve sborníku
Transformation diagrams of selected steel grades with consideration of deformation effect
The aim of this article was to assess the effect of previous plastic deformation on the transformation kinetics of selected steels with a wide range of chemical composition. Transformation (CCT and DCCT) diagrams were constructed on the basis of dila...
Materials engineering
- 2018 •
- Jimp •
- Link
Rok uplatnění
Jimp - Článek v periodiku v databázi Web of Science
Výsledek na webu
Comparison of structural and mechanical properties of case-hardening steel after controlled rolling and plastometric simulation
The aim was to compare two different methods of physical simulation of rolling and controlled cooling of the bar of low-alloy case-hardening steel 16MnCrS5. The results were obtained by hot rolling in the laboratory mill TANDEM and by simulations in ...
JG - Hutnictví, kovové materiály
- 2010 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Effect of plastic deformation on CCT diagram of spring steel 51CrV4
The paper is aimed on appraisal of influence of preceding deformation on spring steel CCT diagrams, which were created on the basis on dilatometric analyses of cooling curves, using universal plastometer Gleeble 3800, CCT a...
Materials engineering
- 2015 •
- D
Rok uplatnění
D - Stať ve sborníku
Study of kinetics phase transformations after plastic deformation of rail steel class IH alloyed with chromium
of the plastometer Gleeble 3800 was used. The Accuracy of the diagrams was faced...
JG - Hutnictví, kovové materiály
- 2016 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 282